Rathaus

[midlife306]

Gary, The bay window I found was crap in comparison to the one Kevin did, I printed Kevin's today with 0.1mm layer height, it looks spot on, I'll feel terrible taking the soldering iron to it lol
Cheers
Wayne


Sent from my iPad using Tapatalk

[Max-U52]

Gary, The bay window I found was crap in comparison to the one Kevin did, I printed Kevin's today with 0.1mm layer height, it looks spot on, I'll feel terrible taking the soldering iron to it lol
Cheers
Wayne


Sent from my iPad using Tapatalk

How long was your print time? When I first put the file into Cura I had it set for .1 mm thickness and 30 mm speed, and it said it would take 19 hours to print. I upped the thickness to .15 and the speed to 60 mm and that got it down to a six hour print.

[midlife306]

Mine took 11 hours.
Let me know how it turns out at 60mm/sec, you probably won’t need the soldering iron trick, it will probably fall to bits under gravity lol
Cheers
Wayne


Sent from my iPhone using Tapatalk

[Max-U52]

When I pulled it off the printer this morning it looked pretty good. I think all the support material will come off with no problem and the window bars seem to be strong enough. I think the cr-10 can handle higher print speeds than your printer. Once you get a CR 10 of your own you'll see exactly what I mean.

[midlife306]

Here’s the product of 40 hours of printing.
I found the files on Thingiverse & scaled them up to 249 percent to give the columns a scale height of 7 feet, hopefully I’ll get the railings printed after work tomorrow.

Cheers
Wayne


Sent from my iPhone using Tapatalk

Here it is with the railings, spikes at the front should go on top but I think the railings look good as they are

Cheers
Wayne


Sent from my iPhone using Tapatalk

[Will01Capri]

WOW
That looks awesome

[Model Builder 4]

Very nice Wayne your printer must be working overtime

Cheers, Lee.

[midlife306]

I wish it was, just busy hitting it with a bfo hammer
Cheers
Wayne