Mother board for tigar that’s Lopo safe??

[Tomcoles]

Does the v2 allow for proportional turret and elevation via a servo. If not it will be no good for me.
So far from the huge amount of reading I have done I think the only available board for me is the IBU2U board as this gives the servo turret and elivation control I want. But at £120 it’s a lot of money.

[tomhugill]

....

[rochesb]

Open Panzer board gives you the option of using servos for turret rotation ,gun elevation , and gun recoil too

[tomhugill]

Open Panzer board gives you the option of using servos for turret rotation ,gun elevation , and gun recoil too

But it's a fair bit more than. £120 if you factor in a decent sound card

[Max-U52]

Does the v2 allow for proportional turret and elevation via a servo. If not it will be no good for me.
So far from the huge amount of reading I have done I think the only available board for me is the IBU2U board as this gives the servo turret and elivation control I want. But at £120 it’s a lot of money.

Ian has the IBU2 Pro listed here for 100 pounds, with a case, and that has servo support for both rotation and elevation.

https://www.rctankelectronics.com/store ... _case.html

Hope that helps.

[rochesb]

Open Panzer board gives you the option of using servos for turret rotation ,gun elevation , and gun recoil too

But it's a fair bit more than. £120 if you factor in a decent sound card

A bit more, but not too much:

Open Panzer TCB £26
Benedini TBS Mini 99 Euro or around £90
2x HobbyKing X-Car 45A Brushed Car ESC @ £7 each

I make that about £130

It would be interesting to do a feature by feature comparison of the various options available.

[tanker ed]

The Elmod Pro also takes Lipo up to 3S and the Elmod Eco up to 2S lipo