Help Needed

[Mad Fox]

hi guys, really need your help, came to do some work on my tank and found that my turret rotation unit had no wires on it, my lad was in here last night on the comp but had had a bit to drink and I think he has knocked them off, so I need details of which wires are for the turret rotation motor and a pic of it wired up inside the unit, if any of you could help me out I would be extreamly greatful, (I've looked in the hints and tips section to see if I can find what I need but can't see anything.

Cheers

Foxy.

[wibblywobbly]

Which end did he knock off, the motor end or the other?

Look at the 8 pin socket. On one end there are two wires. red and black. Red is on the end, black is the next one in. These provide the power to the turret rotation motor.

Follow them up and they should go to the motor. This is the best pic I have! (Ignore the non HL boards)  ::)

Rob G

[Mad Fox]

thanks wibbly, it's the motor end he's knocked off thankfully, an easy fix but I didnt know which wires went to which attachment point, the pic has answered my question and I thank you very much for the help, it is really appreciated.

Regards

Foxy

[Mad Fox]

BTW like the gearbox covers you have made, saves having grease flying everywhere, will fit some on mine I think

[971wright]

Hi Madfox when you resolder the wires swicth it on and check it rotates the correct way with the controler if its assbackwards swop the wires over .

regards pete

[afv]

a bit late but some more, take it is heng long

[Mad Fox]

cheers guys will take that on board.

AFV: yes m8 it is HL and the pics were not too late as I havent soldered them back on yet but the pics have clarified that th wires I had presumed to be the ones that went to the motor are the correct ones so a big thanks to you for those pics too

[afv]

Anytime

regards Jack.