Operation Tamy T1 face lift

Post by **HERMAN BIX** » Sat Jan 06, 2018 9:54 am

Love it

Do one with a Tiger

c.rainford73 · Post by **c.rainford73** » Sat Jan 06, 2018 1:34 pm

Lovely work Mr Burger, both on the tank and the avatar

the saw blade trick is spectacular mate

Burger_Patrol1 · Post by **Burger_Patrol1** » Sat Jan 06, 2018 7:56 pm

Thanks Rainford73...Have a greta weekend!!!

Burger_Patrol1 · Post by **Burger_Patrol1** » Mon Jan 08, 2018 5:01 am

This is the first time I have worked with metal parts for a build, so I decided to try some Burnishing Fluid to get my base weathering. I looked this brand up, "AMMO MIG Jimenez...and it worked great. I like the affect and wish I would have used it before I mounted any of my brass parts. I will be using it from now on when using brass or metal parts...

: P1060001.JPG (88.45 KiB) Viewed 3578 times

: Newly fabbed rear Mud guards up for the test run.; P1060002.JPG (84.73 KiB) Viewed 3578 times

: P1060003.JPG (86.16 KiB) Viewed 3578 times

: This is only after 5 minutes of soaking.; P1060004.JPG (86.42 KiB) Viewed 3578 times

: P1060005.JPG (88.72 KiB) Viewed 3578 times

: After 2 hour soak...I LIKE IT!!!!; P1060006.JPG (92.6 KiB) Viewed 3578 times

: This stuff is AWESOME!!!!; P1060007.JPG (88.22 KiB) Viewed 3578 times

: Since the MIG Burnishing fluid work so well, Im going to try on the Idler Adjustment Covers; P1060009.JPG (92.13 KiB) Viewed 3578 times

: And these clamps; P1060010.JPG (91.26 KiB) Viewed 3578 times

Burger_Patrol1 · Post by **Burger_Patrol1** » Mon Jan 08, 2018 5:13 am

: Real nice affect!!!; P1060011.JPG (90.67 KiB) Viewed 3577 times

: Even on the clamps....; P1060012.JPG (90.02 KiB) Viewed 3577 times

Finally mounted something to the rear Hull, instead of Fabbing

: Mounted the Idler adjustment covers after burnishing.; P1070013.JPG (90.07 KiB) Viewed 3577 times

: Also mounted rear engine heater port cover.; P1070014.JPG (88.74 KiB) Viewed 3577 times

: Right side Idler adjustment cover; P1070015.JPG (88.58 KiB) Viewed 3577 times

c.rainford73 · Post by **c.rainford73** » Mon Jan 08, 2018 12:05 pm

Mr Burger that is some really nice stuff does a great job! Your work looks outstanding

Burger_Patrol1 · Post by **Burger_Patrol1** » Mon Jan 08, 2018 11:16 pm

[quote="c.rainford73"]Mr Burger that is some really nice stuff does a great job! Your work looks outstanding

[/quote

Thank you sir....More to come soon since its raining...all rained out for work the next couple days....

Post by **HERMAN BIX** » Sat Jan 13, 2018 11:40 am

Good Evening Mr Burger................has the rain stopped enough for you to update your progress !!

Us Tiger builders need a bit of a fix mate

Burger_Patrol1 · Post by **Burger_Patrol1** » Mon Jan 15, 2018 3:53 am

HERMAN BIX wrote:Good Evening Mr Burger................has the rain stopped enough for you to update your progress !!
Us Tiger builders need a bit of a fix mate

Hi Mr. Bix,
Sorry I did not get much done this last week....My family took the liberty of passing around a horrible Flu bug, so needless to say I have been a sickbay commando and am still feeling like I was run over by a bus

Here are a couple of pics of the tidbit of work I got done....

: got the two crank shaft clips mounted. Im thinking of not having the crankshaft stowed here properly, because this tank crew won't be AJ squared away.; P1130001.JPG (91.51 KiB) Viewed 3504 times