Tiki Exhausts

Feel free to discuss anything and everything to do with tanking here!
Post Reply
User avatar
JTS
Lance Corporal
Posts: 171
Joined: Sat May 02, 2009 6:03 pm

Tiki Exhausts

Post by JTS »

Hi All


      I was hoping someone would be able to advise me on what type of exhausts "Tiki! (833) would of had.

I have found pictures of Tiki as both 812 and 833 but can't seem to find any rear shots which show the exhausts

Since the photos are pre Kursk, would I be correct in guessing it would be the early exhausts?

Any advice would be much appreciated

                                                        Jim
User avatar
tankmad
Warrant Officer 2nd Class
Posts: 1335
Joined: Tue Jan 27, 2009 10:02 pm
Location: glasgow
Contact:

Re: Tiki Exhausts

Post by tankmad »

I had a tiki 812 and I kept the exhausts standard as far as I know this was correct.
Stevie
http://www.tankworld.co.uk
This is not an obsession I can give it up anytime
User avatar
JTS
Lance Corporal
Posts: 171
Joined: Sat May 02, 2009 6:03 pm

Re: Tiki Exhausts

Post by JTS »

Hi Stevie

Nice paint job that was the camouflage I was thinking of using.

For some reason I keep thinking it's the earlier exhausts, but your's is probably correct.
Thanks for the advice


                          Jim
User avatar
oz
Warrant Officer 2nd Class
Posts: 1051
Joined: Sat Oct 11, 2008 10:47 am
Location: UK

Re: Tiki Exhausts

Post by oz »

you need to take off the exhaust shield's and the deflectors fitted on top of the exhaust stacks and then reposition the adapter plate.........
Last edited by Anonymous on Tue May 19, 2009 10:19 pm, edited 1 time in total.
User avatar
JTS
Lance Corporal
Posts: 171
Joined: Sat May 02, 2009 6:03 pm

Re: Tiki Exhausts

Post by JTS »

Thanks OZ

I was thinking of just buying the earlier exhaust version (the lazy way).

                         

                                                                        Many Thanks


                                                                                          Jim
Post Reply

Return to “General Discussion”