Operation Tamy T1 face lift

[43rdRecceReg]

Glad you're back with us, and bringing some of those magic tricks you perform so well. (Yuri Geller never bent metal quite as convincingly as you do ). I had a shattered ankle two years ago at this time and, until you're immobile, it's hard to appreciate what a lack of mobility can mean. It's now full of Titanium. Try bending that! Anyway, I hope you're healing (and annealing) well. I look forward to seeing more of your informative and detailed presentations. You're setting a good format for others to follow here
Oh yes, maybe it's a tad early, but have a great Christmas too..

[Burger_Patrol1]

Had a bit of an accident and had a couple surgeries. 2017 has been not very good for me!!

Judging by your finely detailed brass work, all that time spent around surgeons has paid off; you've put it together with surgical precision! Fantastic stuff.

Hope you're doing well Burgy, glad to see you back in action mate. All the best for a safe and speedy recovery!

Thanks Raminator....Looking foreward to getting some good progress on the "T1 Face Lift" project.

[Burger_Patrol1]

Glad you're back with us, and bringing some of those magic tricks you perform so well. (Yuri Geller never bent metal quite as convincingly as you do ). I had a shattered ankle two years ago at this time and, until you're immobile, it's hard to appreciate what a lack of mobility can mean. It's now full of Titanium. Try bending that! Anyway, I hope you're healing (and annealing) well. I look forward to seeing more of your informative and detailed presentations. You're setting a good format for others to follow here
Oh yes, maybe it's a tad early, but have a great Christmas too..

Thanks 43rdRecceReg for all your support and kind words!!
I'm feeling much better day by day, but working on these tanks amplifies the healing process.
I can't agree with you more that many times we take things in life for granted. I will be keeping photos of my hospital visits this year on my Hobby board as a reminder to me, not to sweat the small stuff and also to appreciate every minute that I have above the green!!!!
Wow full Titanium, your like the 6 million dollar man!!!! I'm sure that was hell to go through and once finished never the same!!
Merry Christmas to you as well sir, hope Santa brings you some cool toys this year!!!

[Burger_Patrol1]

Hi Guys,...Hope yawl have a Merry Christmas and Santa brings you some nice toys!!!

This next entry is rear ABER rear fender assembly....Might be a bit dry and monotonous for some, but for me, the more details the better
My soldering is kind of on the sloppy side and needs some fine tuning, but I will work on it.

[Burger_Patrol1]

File down sprue flashing smooth.

PC160002.JPG (91.66 KiB) Viewed 3537 times

Bending supports on brake

PC160003.JPG (89.86 KiB) Viewed 3537 times

Repeat bending

PC160004.JPG (90.74 KiB) Viewed 3537 times

Ready to solder in place

PC160005.JPG (91.04 KiB) Viewed 3537 times

Lester self cleaning acid flux

PC160006.JPG (84.66 KiB) Viewed 3537 times

Flux where solder joint is to be.

PC160007.JPG (88.53 KiB) Viewed 3537 times

Pinned in place

PC160008.JPG (89.95 KiB) Viewed 3537 times

PC160009.JPG (87.54 KiB) Viewed 3537 times

PC160010.JPG (88.29 KiB) Viewed 3537 times

Rear mud guard extension supports

PC160011.JPG (86.62 KiB) Viewed 3537 times

[Burger_Patrol1]

PC160012.JPG (86.22 KiB) Viewed 3536 times

PC160013.JPG (90.72 KiB) Viewed 3536 times

PC160014.JPG (88.67 KiB) Viewed 3536 times

Ready for Hinges to be installed

PC160015.JPG (91.06 KiB) Viewed 3536 times

PC160016.JPG (93.85 KiB) Viewed 3536 times

Time for hinge rolling.

PC200017.JPG (85.16 KiB) Viewed 3536 times

Anneal and heal!!!

PC200018.JPG (88.17 KiB) Viewed 3536 times

Roll on micro drill bit

PC200019.JPG (89.08 KiB) Viewed 3536 times

Scale sized

PC200020.JPG (89.43 KiB) Viewed 3536 times

PC200021.JPG (89.38 KiB) Viewed 3536 times

[Burger_Patrol1]

Brass rod for hinges

PC200022.JPG (85.87 KiB) Viewed 3532 times

Perfect fit

PC200023.JPG (89.79 KiB) Viewed 3532 times

X 4

PC200024.JPG (89.02 KiB) Viewed 3532 times

Soldering hinges on main rear mud guard

PC210025.JPG (93.36 KiB) Viewed 3532 times

Mate side extension on hinges.

PC210026.JPG (92.87 KiB) Viewed 3532 times

PC220027.JPG (92.07 KiB) Viewed 3532 times

In my Haste to get mud guards fabbed up,... I over looked that this is an earlier Tiger 1 Mud guard. Since Im trying to make a late version Tiger 1,... I had two choices...Order the right ones and start over or customize these so they look close. I opted to modify these, so I didn't have to spend the extra money and start over. I saw on Amazon, one guy has these late version mud guards listed at $99 american. Thats highway robbery!!!! So onward to modifying....

Notice upper and lower notches in Mud guard. Should be just a rectangle for later versions.

PC220028.JPG (91.15 KiB) Viewed 3532 times

Notice upper and lower notches in Mud guard. Should be just a rectangle for later versions.

PC220028.JPG (91.15 KiB) Viewed 3532 times

ABER Late mud guard kit. Notice Notch differences.

LATE FENDER KIT.jpg (36.8 KiB) Viewed 3532 times

Cut a piece of brass sprue and shaped to fit in notched area.

PC220029.JPG (89.26 KiB) Viewed 3532 times

There, ....now its a later model mud guard...LoL

PC220030.JPG (91.27 KiB) Viewed 3532 times

I will also have to modify the attachment of the fender to the rear hull when the time comes to install...

[maxmekker]

the details

thanks for sharing with us

[Raminator]

I guess there's no substitute for replicated the construction methods and materials in-scale, eh? This is a level of accuracy and functionality you just can't get in plastic; absolutely stunning work.

Are you using an iron or a torch for soldering? I know quite a few members here swear by solder paste, but if you're applying flux are you using solder off a reel?

[Tiggr]

Wowser
Super work Mr BP.
you must have the patience of a saint.