HL Truck Mods

Post by **Model Builder 4** » Sat Nov 04, 2017 8:11 pm

Let the fun begin Carl

Cheers, Lee.

c.rainford73 · Post by **c.rainford73** » Sat Nov 04, 2017 10:18 pm

Here's some side view of the front and rear tires and rims.

c.rainford73 · Post by **c.rainford73** » Sat Nov 04, 2017 10:20 pm

Big thank you to Lee for all his help

midlife306 · Post by **midlife306** » Sat Nov 04, 2017 10:47 pm

By eck, that looks much better!!!
Cheers
Wayne

Sent from my iPhone using Tapatalk

jarndice · Post by **jarndice** » Sat Nov 04, 2017 10:50 pm

Anyone wanting the "Rims" and "Tyres" that Carl has just become the proud owner of,
They are available from---
www.tank-modellbau.de
and they are Art 2430 Rims and Art 2420 Tyres which you will easily find by typing in the Art + number in the search box of the site.
Shaun.

c.rainford73 · Post by **c.rainford73** » Sat Nov 04, 2017 11:02 pm

Thanks Shaun. They are quite nice to work with. With Lee's advice I drilled them out to the proper 10mm width to accept the Heng Long "cap".

The fronts I drilled to 9mm to accept the cap with a very strong friction fit.

c.rainford73 · Post by **c.rainford73** » Sat Nov 04, 2017 11:13 pm

Here's the front rim and tyre before the drill and after. It's very important to start out with a 5mm bit and work your way up to the 9mm hole or your drill will destroy the plastic wheel. One mm at a time.

I then cut the rear of the wheel to match the length of the Heng Long hex sprocket cap

Front done!

c.rainford73 · Post by **c.rainford73** » Sat Nov 04, 2017 11:38 pm

The rear dually rims and tires are drilled 5.5mm inner rear rim. The hub is cut flush with the outer edge of the rim to make room for the second rim. The outer rim gets carefully drilled out to 10mm the entire original hub breaks away.

2mm bit to drill out white nylon hub for longer screw to put all together

I want to show this step by step as I'm doing right now and its per Lee's instructions so all could see it and make thier own setup. I would not have figured this out on my own

Lee you deserve much praise for all your help!

Post by **Model Builder 4** » Sun Nov 05, 2017 12:13 am

Carl you've done a great job with them bud, I'm just glad you could understand my instructions

Cheers, Lee.

c.rainford73 · Post by **c.rainford73** » Sun Nov 05, 2017 12:16 am

Model Builder 4 wrote:Carl you've done a great job with them bud, I'm just glad you could understand my instructions

Cheers, Lee.

Lee your instructions were spot on. Once the pictures arrived the written instructions were a breeze

RC Tank Warfare community hobby forum

HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods

Re: HL Truck Mods