Taigen

[Rubensilva666]

Hi guys.
So im upgrading my heng long.
One of the main chages is the turrent. I have upgrade for a taigen, and that is my problem.
Here is the pic...
This is the connector from the turrent ( i think for the barrel recoil and up and down.

This last one is the female conector
This conector has indepedent up and down

Can someone please helpme?
Thank you

[jackalope]

Is it BB or OR? That plug looks like the BB gun plug.

[Rubensilva666]

This is ir only. It has intensity flash unit

[c.rainford73]

This is ir only. It has intensity flash unit

Ruben did you have bb airsoft originally and then change to Taigen IR flash and recoil?

[c.rainford73]

This is ir only. It has intensity flash unit

Ruben did you have bb airsoft originally and then change to Taigen IR flash and recoil?

Also are you upgrading to the newest version of the rx18 with the T90 functions?

[c.rainford73]

On my Taigen upper hull I have this version connector for my Taigen IR turret. Those three wires plug into the black raised pins on my model

In this underside image you will see the three wires disappear next to the 8pin wires from the rx18

Hope this helps

[Rubensilva666]

This tank originaly is a bb heng long. Uses a 2.4 remote and has double sound.
I think that the mais problem wy i can sort it out is because is transmiter works diferent from the "bb" version.
On the normal version you just "push" the left stik up and the bb mecanism will shot.

On this one if you do that, the barel will only go up. To shoot you need to press the shooting "botton" plus the left stick up.

Heng-Long-Newest-2-4GHz-5-3-Version-Controller-2-4GHz-transmitter-2-4G-remote-control.jpg_640x640.jpg (69.66 KiB) Viewed 1210 times

[Rubensilva666]

This is ir only. It has intensity flash unit

Ruben did you have bb airsoft originally and then change to Taigen IR flash and recoil?

Yes it was what i did