Installing Clark tk22 but..........
- Wolverine Tanker
- Private
- Posts: 51
- Joined: Tue Feb 21, 2017 11:22 pm
- Location: The Great Lake State=Michigan
Installing Clark tk22 but..........
I have a Taigen 1/16th scale Tiger 1 tank with air soft. I recently bought a Clark tk 22 board to add more realistic sounds. I received in the mail today and thought that it was going to be a 5 minute install. I got on line and watched all the available videos on how it is installed. The one thing all the videos didn't show or explain was ...When mating the upper hull to the lower where in the heck does the little red and black wire connect to the Clark board ? Please can someone help this noob out?
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Installing Clark tk22 but..........
Send some pictures so we can help you out. I'm sure it's something simple
Tanks alot....

- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Installing Clark tk22 but..........
What wires are you trying to connect. There are. Quite a few black and red wires lol
Tanks alot....

- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
- Wolverine Tanker
- Private
- Posts: 51
- Joined: Tue Feb 21, 2017 11:22 pm
- Location: The Great Lake State=Michigan
Re: Installing Clark tk22 but..........
I made a mistake. The wire color is red and white. I'll have some pictures tomorrow.
The more I look at your pictures I think it is the the air soft recoil switch.
The more I look at your pictures I think it is the the air soft recoil switch.
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Installing Clark tk22 but..........
OK airsoft is not plug and play with the Clark board. Some reprogramming needs to be done if this is the case ( possibly some rewiring also)Wolverine Tanker wrote:I made a mistake. The wire color is red and white. I'll have some pictures tomorrow.
The more I look at your pictures I think it is the the air soft recoil switch.
Carl
Tanks alot....

Re: Installing Clark tk22 but..........
https://www.youtube.com/watch?v=TvRpXb_4TFQ
found this video of Eric at Taigen Tanks fitting a clark tk22 to a king tiger bb version it required an extra wire fitted not sure if it helps
found this video of Eric at Taigen Tanks fitting a clark tk22 to a king tiger bb version it required an extra wire fitted not sure if it helps
Re: Installing Clark tk22 but..........
Take a look at the photo above where they show the CN numbers. What you have is indeed the two wires for the trigger switch, and they go on pins four and five of port CN3.
Make sure your TK22 is programmed for airsoft, not IR. I believe you can do that with any sony remote (I think the power button changes from IR to airsoft) but you will need the programming device that plugs into the board (an IR receiver and LED). I've done this a few times so if you have any trouble just holler. Clark airsoft and clark IR are different animals.
Make sure your TK22 is programmed for airsoft, not IR. I believe you can do that with any sony remote (I think the power button changes from IR to airsoft) but you will need the programming device that plugs into the board (an IR receiver and LED). I've done this a few times so if you have any trouble just holler. Clark airsoft and clark IR are different animals.
When FDR coined the phrase "The Arsenal of Democracy", he was talking about Detroit. Proud to live in the 2nd most violent city in America!!