Nightrider wrote:jarndice wrote:I expect I shall not be the only one who says that the sound files on the IBU2 are as good as YOU want them to be,
Shaun.
Ok I didn't know that it just seems that when you see a vid on the YouTube of a kv using ibu2
https://m.youtube.com/watch?v=6RkVLr_SMYU
It just don't seem as good as the ibu3 the engine idling or revving or the way it delivers the sound it all seems slightly off
https://m.youtube.com/watch?v=BK1pVxzJrR0
But if I'm wrong and have just not seen a good video of it why have they made the ibu3 apart from the obvious money reasons and new is good ?
Cheers Ben.
Hello Nightrider, you have spotted the difference between the IBU2 and IBU3 ( my video is of the KV1 IBU3 )
the IBU2 uses SD card With pre loaded soundsets , and rely on the onboard computer processor (so to say) , to 'play' the sounds , as you can hear you sometimes get small gaps between each step/soundfile.
It takes a lot of work tweaking to the soundsets for them to be super smooth in transitions, but this in how it is With some of the SD based aftermarked sound and controll Boards .
The New range of Boards now , like the ibu3 and Clark TK series , uses onboard chip memory for Storage , so that mean you use the pre loaded soundset, and if you want to change, you Connect it to the pc , and load a New soundset to the card , and it will 'flash it self, and be ready for action.
Here you have a few sound demo Clips
IBU2
ibu3
Clark tk60
here you will a glimps of the sound programing
Hope this helps a little
