I need a helping hand - Belgium ?

[EagleOne]

Hello members,

I would like to have a helping hand (literally) to configure my Spektrum Dx6e and receiver form my Taigen Jagdpanther.
It would be nice that someone here in Belgium can help me out ! Maybe just across te border of Northern Belgium.
It would also be a learning proces for me. I'm not familiar with it and it is my first RC tank.

I don't have the know-how and the (intelligence) to do it. I tried it several times with the helping words of some members on this forum, but no result for my tank. Anyway many thanks to the members !
It would be great to let work my new IBU2 pro on my Taigen tank.

Thanks

M.

[Rad_Schuhart]

Im too far to go there, lol, but you can take some photos of your Ibu and receiver connected and we might see whats going wrong.

[EagleOne]

Im too far to go there, lol, but you can take some photos of your Ibu and receiver connected and we might see whats going wrong.

Hi Rad,

I've med you in some earlier post of me.
I tried many things and had no results. I'm pretty sure that the connections are good connected and did what everybody told me to do to program the board and transmitter.

Maybe the only thing I had in mind and saw at my receiver. When I connect some wires from the board to the receiver, the light on the receiver disappears ! It looks that the receiver does not have power ?

Is this normal ?

Greetings

M.

[tomhugill]

Im too far to go there, lol, but you can take some photos of your Ibu and receiver connected and we might see whats going wrong.

Hi Rad,

I've med you in some earlier post of me.
I tried many things and had no results. I'm pretty sure that the connections are good connected and did what everybody told me to do to program the board and transmitter.

Maybe the only thing I had in mind and saw at my receiver. When I connect some wires from the board to the receiver, the light on the receiver disappears ! It looks that the receiver does not have power ?

Is this normal ?

Greetings

M.

No it's not, could be the issue.

[tomhugill]

Are you plugging the wires from the board in the correct way? The ibu plugs don't have the tabs to ensure correct orientation

[EagleOne]

Are you plugging the wires from the board in the correct way? The ibu plugs don't have the tabs to ensure correct orientation

I think a connected them in the right way !
The more I think about it, it could be the receiver who is broken ore my transmitter Spektrum Dx6e who is'nt compatible with the board.

Greetings

[tomhugill]

Are you plugging the wires from the board in the correct way? The ibu plugs don't have the tabs to ensure correct orientation

I think a connected them in the right way !
The more I think about it, it could be the receiver who is broken ore my transmitter Spektrum Dx6e who is'nt compatible with the board.

Greetings

Nope dx6 is fine with the ibu2.

Your best bet is get a 4.8v receiver pack and a servo and make sure your transmitter and receiver are working properly

[Ad Lav]

I have a friend in Belgium who could help you out - he's not far from Brussels.

[EagleOne]

I have a friend in Belgium who could help you out - he's not far from Brussels.

Hi,

Who is he ?
Can I get in contact with him ?
Is he familiar with the Spektrum Dx6e and receiver AR610 and IBU2 pro ?
Do he can fix my problem?

Thanks
M.

[Ad Lav]

I'll ask him now.

[Rad_Schuhart]

Stupid question: Did you bound your radio and receiver?

[EagleOne]

Stupid question: Did you bound your radio and receiver?

Yes, I did !

[Rad_Schuhart]

I insist that uploading photos or videos will help us a lot. If you dont let us help you propperly it will be harder, as you can imagine.

[tomhugill]

I insist that uploading photos or videos will help us a lot. If you dont let us help you propperly it will be harder, as you can imagine.

This

[Mexanik]

Здравствуйте !
1. выбрать тип модели - Самолёт или Планер ( я настраиваю на самолёте )
2. Выбрать тип управления - MODE 2 ( левый газ )
3. Поставить пружинку или ставить левый стик по центру !
4. биндить приёмник .
Подключить все каналы правильно .
Башня и стрельба должна работать без двигателя .
Если нужны будут фото я сделаю . Дайте вашу почту .

[silversurfer1947]

Bearing in mind previous experiences, it would appear that this is not spam. It translates as follows:-


Hello !
1. choose the type of model - airplane or glider (I set up on the plane)
2. Select the type of control - MODE 2 (L gas)
3. Put the spring-loaded or set the left stick in the middle!
4. Bindo receiver.
Connect all channels correctly.
Tower and shooting should work without a motor.
If need be, I'll do a photo. Give your mail.
Do not praise the beauty of the tank and its driving characteristics and specifications!

Mexanik
Recruit

[Mexanik]

Здравствуйте !
Я из России , хотел помочь !
Не могу выложить фото своих танков !

[Mexanik]

Постройка с нуля !