Two turret/gun questions

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
User avatar
lifeofbrian
Lance Corporal
Posts: 113
Joined: Sat Dec 24, 2016 8:09 pm
Location: Surrey, UK

Two turret/gun questions

Post by lifeofbrian »

I have bought two used Taigen tanks both with gun issues. My Pantiger gun is loose and is held in by nothing (see pic), and I need to remove my Panzer IV F2 gun to check for a jam (see vid). So 1. how do I attach the Pantiger gun, is it supposed to be attached to those green rods? 2. How do I remove the Panzer IV gun, does it pull off, or do I need to remove the turret?

Cheers.


Image

Vid of panzer IV jam.
Taigen Panver IV F2 // Taigen Pantiger
User avatar
tanker 242
Corporal
Posts: 407
Joined: Sun Dec 09, 2012 5:14 pm

Re: Two turret/gun questions

Post by tanker 242 »

hi lifeofbrian, with the tiger you need to use two small screws to connect the mantlet to the two small holes in the sides of the bb unit on either side where the barrel goes in as for the barrel jam on your pzr 4 is a bb stuck then you need to remove the barrel & push the bb out with something , tanker 242
User avatar
tanker 242
Corporal
Posts: 407
Joined: Sun Dec 09, 2012 5:14 pm

Re: Two turret/gun questions

Post by tanker 242 »

ps you need to remove the turret to get to the inside the barrel attachment should show you how the pan tiger is attached , tanker 242
Post Reply

Return to “General Questions”