clark tk 22 recoil problems

Jughead · Post by **Jughead** » Tue Nov 15, 2016 1:13 am

Why does the barrel recoil on my tk 22 board want to activate instantly when I turn on tank ? This is doing this on not one , but 3 or 4 of my tanks , it's plugged in correctly beside my 5 wire ir plug , my radio is also shutoff at the time , it's ruining my servos and other recoil parts, I'm left with leaving my recoils unhooked from the board to save parts , grrrr , very aggravating , any answers would be greatly appreciated, thanks

Jughead · Post by **Jughead** » Tue Nov 15, 2016 1:15 am

Why does the barrel recoil on my tk 22 board want to activate instantly when I turn on tank ? This is doing this on not one , but 3 or 4 of my tanks , it's plugged in correctly beside my 5 wire ir plug , my radio is also shutoff at the time , it's ruining my servos and other recoil parts, I'm left with leaving my recoils unhooked from the board to save parts , grrrr , very aggravating , any answers would be greatly appreciated, thanks

Jughead · Post by **Jughead** » Tue Nov 15, 2016 1:15 am

Why does the barrel recoil on my tk 22 board want to activate instantly when I turn on tank ? This is doing this on not one , but 3 or 4 of my tanks , it's plugged in correctly beside my 5 wire ir plug , my radio is also shutoff at the time , it's ruining my servos and other recoil parts, I'm left with leaving my recoils unhooked from the board to save parts , grrrr , very aggravating , any answers would be greatly appreciated, thanks

jackalope · Post by **jackalope** » Tue Nov 15, 2016 2:47 am

Threads merged.

Post by **dgsselkirk** » Tue Nov 15, 2016 3:19 am

sounds like you need to go into programming mode and reverse the servo direction...

971wright · Post by **971wright** » Tue Nov 15, 2016 4:22 pm

Hi you should only have Tank switched on when radio is on , when you switch a tank on and do not have radio on you could have chance of the tank running off, also servos that are on with no signal can twitch even cycle from end to end can depend on the servo type your using. If the recoil dosnt move when radio is on , you don't have a problem .

regards pete

Jughead · Post by **Jughead** » Tue Nov 15, 2016 11:48 pm

Perfect ! Tried it on all 3 tanks numerous times and worked great with no twitch or servo sound , thanks Pete , I'll also check my program from dean's idea for insurance, glad to get this problem solved before seasons end , we have one more indoor meet here in ontario, thanks again boys , ( sorry about the multiple post )

Jughead · Post by **Jughead** » Tue Nov 15, 2016 11:57 pm

Perfect ! Tried it on all 3 tanks numerous times and worked great with no twitch or servo sound , thanks Pete , I'll also check my program from dean's idea for insurance, glad to get this problem solved before seasons end , we have one more indoor meet here in ontario, thanks again boys , ( sorry about the multiple post )

Jughead · Post by **Jughead** » Tue Nov 15, 2016 11:58 pm

Perfect ! Tried it on all 3 tanks numerous times and worked great with no twitch or servo sound , thanks Pete , I'll also check my program from dean's idea for insurance, glad to get this problem solved before seasons end , we have one more indoor meet here in ontario, thanks again boys , ( sorry about the multiple post )

Jughead · Post by **Jughead** » Wed Nov 16, 2016 12:03 am

Sorry did it again , can't get off post without multiple post .........

RC Tank Warfare community hobby forum