T34 driving problem
T34 driving problem
Fitted a rx18 board into my t34, connected the motors, Ive found that to forward /reverse i move the stick left/right and to turn stick up and down, any ideas people???
-
- Warrant Officer 1st Class
- Posts: 1557
- Joined: Mon Oct 20, 2008 12:24 am
- Location: Wixom MI USA
Re: T34 driving problem
I seem to recall that the motor connectors on the T34 are the opposite way around (or at least one side is).
I had to flip at least one of the sockets on an RX14 board to make it work - the sockets can be pulled off the pins fairly easily if you take it steady.
I'll see if I took some pics when I opened mine up...
I had to flip at least one of the sockets on an RX14 board to make it work - the sockets can be pulled off the pins fairly easily if you take it steady.
I'll see if I took some pics when I opened mine up...
-
- Warrant Officer 1st Class
- Posts: 1557
- Joined: Mon Oct 20, 2008 12:24 am
- Location: Wixom MI USA
Re: T34 driving problem
Compared with what Whacky posted on his site ( http://members.iinet.net.au/~wackywheelz/t34/ ), I had to reverse the socket for the left motor
I hope this helps,
Mart
I hope this helps,
Mart
Last edited by Ex_Pat_Tanker on Sat Mar 28, 2009 6:29 pm, edited 1 time in total.
Re: T34 driving problem
Cheers ex pat will try in morning and get back to you
Re: T34 driving problem
Finally got to swap the wires worked fine Cheers