OMG IBU2 pro does'nt work with my Spectrum DX6e

[EagleOne]

Hey, I hope that someone can help me !

What do I have :
Taigen Jagdpanther (IR version) with Rc transmitter 2.4 Ghz
New board IBU2 pro
New Spektrum DX6e with receiver AR610 (6 ch)

What's the general problem :
Can't operate the tank with my new installed IBU2 pro and Spektrum transmitter en receiver

What did I (correctly) :
Installing the IBU2 pro ref. to the manual
Bind-ing the Rc transmitter with the receiver

What does it do :
Green light on the IBU2 pro blinks all the time, also the head lamp of the tank.
That's all

What did I have done with the IBU2 pro :
Connected the 4 channels from the IBU2 pro to the receiver ref to the many manuals on this forum.
Tried it several times, no result !

Asking to you all :
- Manual step by step what I have to do to let work my 50th B-day Jagdpanther (first Rc tank) !
- Is it possible to use the standard 2.4 Ghz Taigen transmitter on the IBU2 pro ?
- Are there other opportunities then use the IBU2 pro ?

It would be heaven if someone can help me out with my issues.

Thanks

[tomhugill]

Have you tried plugging in Servos to the reciver to make sure they're working properly?

[Del]

Did you follow the calibration procedure correctly

[DavyT5]

Hi
I got my DX6I to work with my Challenger and my Leopard and with AR610 as follows

AR610 CH1 =Throttle IBU2 input 1

CH2 = ALE IBU input 4

CH3 EILE IBU input 3

CH 4 Rudder IBU Input 2

hope this helps

Dave

[EagleOne]

Have you tried plugging in Servos to the reciver to make sure they're working properly?

No, I don't have them !

[EagleOne]

Did you follow the calibration procedure correctly

Yes, I have done the calibration like they do in this forum, nothing helped !

[EagleOne]

Hi
I got my DX6I to work with my Challenger and my Leopard and with AR610 as follows

AR610 CH1 =Throttle IBU2 input 1

CH2 = ALE IBU input 4

CH3 EILE IBU input 3

CH 4 Rudder IBU Input 2

hope this helps

Dave

Hey Dave,
I've done that aswell, sorry no result !

[EagleOne]

Hey All,

Is it possible that my transmitter don't recognize my receiver ? When I've done the binding, the lights then blinged, now it stays on !

[EagleOne]

Did you follow the calibration procedure correctly

I've done the calibration like they do i tin this forum.

[Rad_Schuhart]

You have the PRO. So you need to connect FIVE CHANNELS. The fifth is the one who starts the engine.