StuH-42 Early build

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
Dackel
Recruit
Posts: 17
Joined: Tue Nov 01, 2016 12:45 am
Location: Round Rock, Texas

StuH-42 Early build

Post by Dackel »

I am in need of some technical info on a StuH 42 Mato all meat build I am doing. I am in need of the measurement of the barrel length as it sticks out from the muzzle break to the start if the muzzle break. If you have the measurement from a 1/35 model, I can put my math skills to use. Thanks!

Al
Top
sassgrunt
Staff Sergeant
Posts: 751
Joined: Wed Oct 29, 2008 9:08 am
Location: Hawaii, USA

Re: StuH-42 Early build

Post by sassgrunt »

I started on a 1/16 one a couple of years ago. I am using a modifies Bandai Tiger I muzzle brake on it. I'm not sure where I got my barrel length measurements from at the time, but mine is 50mm from where it exits the stock mantlet to the rear of the muzzle brake itself. If you use a plain (unthreaded) barrel, that may extend the length to closer to 60mm.
Top
Dackel
Recruit
Posts: 17
Joined: Tue Nov 01, 2016 12:45 am
Location: Round Rock, Texas

Re: StuH-42 Early build

Post by Dackel »

Thanks for the information, I do appreciate it.

Al
Top
Post Reply

Return to “General Questions”