Slow forward, fast reverse

[Jimigood]

Are you using the stock receiver? Did you have any issue with feedback from your speaker?

[tomhugill]

Yes I'm using the standard rx, no more so than any other electrics package.

[tomhugill]

In mode two you need to put the lead from the channel two pins coming off the ibu into channel 1 and channel 1 comming off the ibu into two in the receiver, 3 into 3 and 4 into 4. Make sure nothing's reversed on the tx and let me know what happens

[Jimigood]

In mode two you need to put the lead from the channel two pins coming off the ibu into channel 1 and channel 1 comming off the ibu into two in the receiver, 3 into 3 and 4 into 4. Make sure nothing's reversed on the tx and let me know what happens

Yes. That's how it is set up. When I first installed it they wasn't tho. Lol. That was fun

[Jimigood]

Yes I'm using the standard rx, no more so than any other electrics package.

Ok. Just wondering. Mine makes a loud beeping noise. I unplugged the servos to see if they was the cause but it still happens even without them. I should probably try to post a video.

[Jimigood]

ok drum role please..............

THE FIX

went into the sd card
went to channel 1 inverse
and changed it to TRUE
went to transmitter
reversed the forward/reverse on it
now same speed both directions.

now correct me if I'm wrong, but isn't this backwards?

And i still cant get this stupid beeping out of my speaker.

[Jay-Em]

Beeping is a bad sign. sounds like the IBU's audio Amp is busy dying. Or worse, the logical unit /cpu. The wonky controls and the impossibility to fix it without jumping through hoops is bad news.

If I were You, I'd get the thing back to the supplier asap.

[tomhugill]

ok drum role please..............

THE FIX

went into the sd card
went to channel 1 inverse
and changed it to TRUE
went to transmitter
reversed the forward/reverse on it
now same speed both directions.

now correct me if I'm wrong, but isn't this backwards?

And i still cant get this stupid beeping out of my speaker.

Are you using servo recoil/elevation/traverse?

[tomhugill]

Beeping is a bad sign. sounds like the IBU's audio Amp is busy dying. Or worse, the logical unit /cpu. The wonky controls and the impossibility to fix it without jumping through hoops is bad news.

If I were You, I'd get the thing back to the supplier asap.

I've found this sort of noise is usually caused by an unhappy/stalled servo. I suspect the issue with the controls are a combination of radio/plugs/card settings and is something that could be solved easily in person but difficult to do via PC.

[Jimigood]

Beeping is a bad sign. sounds like the IBU's audio Amp is busy dying. Or worse, the logical unit /cpu. The wonky controls and the impossibility to fix it without jumping through hoops is bad news.

If I were You, I'd get the thing back to the supplier asap.

I've found this sort of noise is usually caused by an unhappy/stalled servo. I suspect the issue with the controls are a combination of radio/plugs/card settings and is something that could be solved easily in person but difficult to do via PC.

Ah. I thought the servos was the culprit also. So I unplugged them and did the movements without them installed and the noise is still present.