Tiger E Blue prints

hnto · Post by **hnto** » Sun Jul 31, 2016 5:45 pm

hello tankwarfare community , I'm from Brazil and I'm trying to make my first rc tiger tank but here we did not get much information about it, someone would have the plans with the measures it? I 'm really struggling to find its measures , particularly measures on any scale , I do the conversion because intend construilo in 1/16 or even 1/8 , please someone help me .

AlwynTurner · Post by **AlwynTurner** » Sun Jul 31, 2016 5:52 pm

Hi Hnto
this is where I get my blueprints from - hope this helps
https://www.the-blueprints.com/blueprin ... f_e_tiger/

You should be able to scale to either 1/8 or 1/16 from this using pc paint

Good luck with your build
Alwyn

hnto · Post by **hnto** » Mon Aug 01, 2016 6:16 pm

thanks Alwyn, u have some messurements of tiger?

AlwynTurner · Post by **AlwynTurner** » Mon Aug 01, 2016 6:43 pm

Hi Hnto, this is the wiki entry which should give a lot of information on key measurements:
https://en.wikipedia.org/wiki/Tiger_I

Good luck with the build. Why don't you start out with a ready built tank like a heng long Tiger 1 and customise it?

http://www.ebay.com/itm/1-16-RC-2-4G-He ... 2153276502

Regards
Alwyn

blimp · Post by **blimp** » Mon Aug 01, 2016 7:42 pm

Hello Hnto - We have stuff like this in our reference section

- http://tiger1.info/vehicle.html and http://tiger1.info/turret.html viewtopic.php?f=105&t=1118

hnto · Post by **hnto** » Tue Aug 02, 2016 1:20 am

Anyone know these measures ?

AlwynTurner · Post by **AlwynTurner** » Tue Aug 02, 2016 7:27 am

Hi Hnto, from the wiki listing the length of a Tiger 1 E is 6.316 metres, the width is 3.56 metres, to get the scale lengths divide by 8 for 1/8 scale or 16 for 1/16 scale. If you then print the blueprints to this scale using pcpaint (the print setup allows you to change the print % size) then you can take the measurements from the blueprint for the rest of the tank. If you have problems with this (and scratch building can be very complex and tricky for anyone who hasn't done it before) then I would encourage you to start out by buying a second hand Heng Long Tiger 1 and use that as a base.

Regards and good luck with your build
Alwyn

hnto · Post by **hnto** » Wed Aug 03, 2016 6:29 pm

Por favor ajudem e eu não irei mais atrapalha-los

I need a measures of hull not detailed just the hull

jamie151uk · Post by **jamie151uk** » Wed Aug 03, 2016 9:34 pm

If you put the right keywords in any search engine you can find all you need to know.

in addition as some one has mentioned buy a cheap 1/16 model and make your own plans

RC Tank Warfare community hobby forum