My Firefly Finished...

Here is where you can show off your finished tanks and military vehicles, post pics and info on your arsenal!
Forum rules
If you're planning on posting a log of your build please use the relevant build sections.
User avatar
Ecam
Warrant Officer 1st Class
Posts: 2203
Joined: Sun Jul 13, 2014 6:30 pm
Location: Lake of the Ozarks, USA

Re: My Firefly so far...

Post by Ecam »

Awesome, I'll look for it.

You are further down the road with your VC than I am. Nice work so far.
"Don't believe everything you see on the internet" - George S. Patton

Eric
User avatar
Rebel 1
Recruit
Posts: 26
Joined: Fri Jul 22, 2016 3:15 pm
Location: Rhode Island USA

Re: My Firefly so far...

Post by Rebel 1 »

Awesome looking Firefly Brian!!! Are you using the resin turret and parts that are being sold on E-bay for the turret conversion? Great job on extending the hull as well!!! Keep up the great work. 8)
Just give me something to shoot at!!! ;D
brizo58
Warrant Officer 2nd Class
Posts: 1321
Joined: Mon Jan 18, 2010 3:35 pm
Location: Romford.Essex

Re: My Firefly so far...

Post by brizo58 »

Hi Reb,
Yea this is the conversion from Dgsselkirk in Canada he's on the forum. Almost finished now just the Decals to go on. That's my job for the morning decided to go for county of London yeomanry. So some more pictures tomorrow. Plus I'm waiting for the Brit commander to get here. Brian...
User avatar
Markocaster
Staff Sergeant
Posts: 997
Joined: Mon Mar 31, 2014 11:16 pm
Location: Bay Area , California

Re: My Firefly so far...

Post by Markocaster »

Looking great so far :thumbup:
HL /Mato tiger 1 early, Tamiya Tiger 1 early, Taigen tiger 1 mid
Taigen T34/85, HL SU-100
Jagdpanzer Lang
Taiga Jagdpanther
Heng Long Sherman DGS Firefly kit
Tamiya King Tiger (unbuilt)
Mato all metal Panzer III
1/10 Jagdpanther
brizo58
Warrant Officer 2nd Class
Posts: 1321
Joined: Mon Jan 18, 2010 3:35 pm
Location: Romford.Essex

Re: My Firefly so far...

Post by brizo58 »

image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
Hi All.
Well this is my FireFly VC, so far almost done now just Decals to fit and very minimal whethering. I want it to look as it just rolled off the LCT on D Day. Here's a list of the bits and bobs I made and fitted.
1/.Lenghtened the chassis by 20mm.
2/.made loaders hatch stop bracket.
3/.fitted brush guards to all periscopes
4/.fitted tow hooks to tow brackets. The Leo 2A6 ones fit and are the correct ones.
5/opened drivers and bow gunners hatchs. On/off switch under drivers hatch also fitted periscope to hatch. No scope on the bow gunners hatch as there was no 5th man in this position it was used for Ammo storage.also hatch stops fitted.
6/.made and fitted blanket box.
7/.made commanders periscope too move.
8/.made and fitted underside engine and radiator access hatches
9/. Changed HL Wheels to Mato ones! These ones have rubber tyres.
Here's some pictures for you. Enjoy!!. Brian...
User avatar
Ad Lav
Captain
Posts: 4247
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: My Firefly so far...

Post by Ad Lav »

Great work Brian!
User avatar
Raminator
Warrant Officer 2nd Class
Posts: 1309
Joined: Tue Aug 11, 2015 9:57 am
Location: Newcastle, Australia

Re: My Firefly so far...

Post by Raminator »

Looks great, Brian. The contrast on the tracks is really striking, it's a great way to pick out the detail.

What are you planning for the markings?
User avatar
43rdRecceReg
Major
Posts: 6295
Joined: Fri Jul 31, 2015 11:38 am
Location: North West Highlands, Scotland

Re: My Firefly so far...

Post by 43rdRecceReg »

Most impressed. :O :clap:
I have the same kit, and have been mulling the lengthening option over, and how to achieve that distinctive M4A4 look. The more I ponder it, the less inclined I am to stick with the suggested M4A3 chassis. Your extra 20mm really does look more authentic. I just wonder how many extra links the tracks needed, and whether you have any flexing issues with the lengthened chassis... even though it looks rock solid?
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
brizo58
Warrant Officer 2nd Class
Posts: 1321
Joined: Mon Jan 18, 2010 3:35 pm
Location: Romford.Essex

Re: My Firefly so far...

Post by brizo58 »

Hi,
Track wise 4 extra links per side, the chassis no flex at all. I cut the chassis and put fillets on the inside then removed the battery box and lined the inside with 2mm plascard.the underside of the chassis was then reinforced with 2mm card the full length of the floor. I then used filler on the sides behind the 1st and 2nd wheel bogeys. I then put strengthen prices of 3mm card across the chassis to make the battery box and inclosed the gearboxes also inclosed the smoke unit. Along the top of the chassis above the tracks I used again 2mm card. So now I have a chassis that is stronger than it was before. I checked it along side another M4 chassis I have and that one flexed more than the one I cut. I hope this helps you decide!!. I was very worried when I cut up the lower hull but it all went well. Just make sure when you line up the chassis you have exactly 10mm gaps in all 4 places and the rest is straight forward in useing 2 and 3mm plastic card and of course some filler. I used a very small amount of it so much less rubbing down. :thumbup: . Brian...
User avatar
43rdRecceReg
Major
Posts: 6295
Joined: Fri Jul 31, 2015 11:38 am
Location: North West Highlands, Scotland

Re: My Firefly so far...

Post by 43rdRecceReg »

Thanks a lot, Brian, for the detailed description of how you stretched the M4 chassis. I'll use it as a template for my own Firefly elongation job. Now, there's a compliment :thumbup:
Anyway, On another thread, there was a discussion on the respective merits of various glues and cements, when bonding resin to resin and also styrene to abs. I just wondered what brand of cement you used to bond the 2 and 3mm plasticard to the Heng Long (ABS) frame? Are you using magnets to link the upper (Dean created) hull to your chassis, or have you devised a one-off means? Resin, being brittle, snaps easily it seems..like hard chocolate.. so I wonder whether you've reinforced the upper hull and turret in any way? I thought of laminating them with fibre glass tape (car body repair type) and epoxy resin..
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Post Reply

Return to “Show Off”