Hi,
for about one and half year I have in construction a Landing Craft Mecanized Barge LCM 6, I post one picture of the barge at to day
situation:
I hope to finish it for June mounth because my club will have a demonstration of boats in a bassin and I wil be happy if I can put in water my barge
If some of you are interested by the construction of this LCM,, I, can post serie of pictures of the steps of theconstruction.
Boris
LCM 6 1/16 scale
- roy.kendall123
- Recruit
- Posts: 40
- Joined: Thu Mar 10, 2016 10:54 pm
Re: LCM 6 1/16 scale
Hi Boris. Always happy to see new builds and other people's methods in the construction. Roy
-
- Recruit
- Posts: 35
- Joined: Sat Dec 19, 2015 11:03 am
Re: LCM 6 1/16 scale
Hi,
just a little vidéo on the working door opening system :
https://www.youtube.com/watch?v=D17XpnzIkeU
Boris
just a little vidéo on the working door opening system :
https://www.youtube.com/watch?v=D17XpnzIkeU
Boris
-
- Recruit
- Posts: 35
- Joined: Sat Dec 19, 2015 11:03 am
Re: LCM 6 1/16 scale
Hi,
for Roy.Kendall 123 who is interested by the construction of the barge :
parts of frames :
on the shipyard :
http://img.xooimage.com/files97/f/4/a/1 ... 2b0063.jpg
the hull is covered with thin paper to minimize the falce frames :
then thy are rub down and paint:
a thin piece of plywood is inserted at the rear of the hull to be inserted in the mould to allow the remowing of the finished hull from the mould :
The ground protection are put on the hull :
front door opening on the model hull :
The fiberglass mould :
the model of the inside tank of the barge :
the mould :
The inside tank :
the door :
the hull mould in place on the yard :
the hull :
the hull with inside tank and the door :
the inside tank is glued into the hull:
the helmsman cabin :
Foam rubber string for water tightening of the door :
false frames and upper parts of the tank:
inside tank covers :
propellers shaft assembly :
propeller shafts glued on the hull
rudder assembly :
the barge :
propellers, rudders and ground protections :
Deck :
first door winch :
second door winch :
third door winch :
And now, the door works well
Boris
for Roy.Kendall 123 who is interested by the construction of the barge :
parts of frames :
on the shipyard :
http://img.xooimage.com/files97/f/4/a/1 ... 2b0063.jpg
the hull is covered with thin paper to minimize the falce frames :
then thy are rub down and paint:
a thin piece of plywood is inserted at the rear of the hull to be inserted in the mould to allow the remowing of the finished hull from the mould :
The ground protection are put on the hull :
front door opening on the model hull :
The fiberglass mould :
the model of the inside tank of the barge :
the mould :
The inside tank :
the door :
the hull mould in place on the yard :
the hull :
the hull with inside tank and the door :
the inside tank is glued into the hull:
the helmsman cabin :
Foam rubber string for water tightening of the door :
false frames and upper parts of the tank:
inside tank covers :
propellers shaft assembly :
propeller shafts glued on the hull
rudder assembly :
the barge :
propellers, rudders and ground protections :
Deck :
first door winch :
second door winch :
third door winch :
And now, the door works well
Boris
Re: LCM 6 1/16 scale
This is a world of art borris! Now you have the mound will you be producing hulls?
-
- Recruit
- Posts: 35
- Joined: Sat Dec 19, 2015 11:03 am
Re: LCM 6 1/16 scale
Hi,
No, I'am not interested to make series, but I can lend the moulds
Boris
No, I'am not interested to make series, but I can lend the moulds
Boris
-
- Recruit
- Posts: 35
- Joined: Sat Dec 19, 2015 11:03 am
Re: LCM 6 1/16 scale
Hi,
me revoilà ! J'ai confié à un copain du club de terminer la barge sauf un après midi ou je m'y suis rendu pour barbouiller
le haut de la coque.
Le 3 juillet il y avait une sortie du club à l'étang de Maison Blanche à Clamart et on en a profité pour mettre la
barge à l'eau.
Les toubibs m'ayant octroyé un bon de sortie pour l'après midi, j' ai fait quelques photos de celle ci dans l'eau,
mais il reste encore quelques détails à finir pour qu'elle soit complète :
J'ai pas pu faire la vidéo que prévoyais, car j'ai été bousculé par des gens au bord du bassin : la sortie du M5 de la barge !
Boris
me revoilà ! J'ai confié à un copain du club de terminer la barge sauf un après midi ou je m'y suis rendu pour barbouiller
le haut de la coque.
Le 3 juillet il y avait une sortie du club à l'étang de Maison Blanche à Clamart et on en a profité pour mettre la
barge à l'eau.
Les toubibs m'ayant octroyé un bon de sortie pour l'après midi, j' ai fait quelques photos de celle ci dans l'eau,
mais il reste encore quelques détails à finir pour qu'elle soit complète :
J'ai pas pu faire la vidéo que prévoyais, car j'ai été bousculé par des gens au bord du bassin : la sortie du M5 de la barge !
Boris
- Markocaster
- Staff Sergeant
- Posts: 991
- Joined: Mon Mar 31, 2014 11:16 pm
- Location: Bay Area , California
Re: LCM 6 1/16 scale
That's amazing, great work Boris
HL /Mato tiger 1 early, Tamiya Tiger 1 early, Taigen tiger 1 mid
Taigen T34/85, HL SU-100
Jagdpanzer Lang
Taiga Jagdpanther
Heng Long Sherman DGS Firefly kit
Tamiya King Tiger (unbuilt)
Mato all metal Panzer III
1/10 Jagdpanther
Taigen T34/85, HL SU-100
Jagdpanzer Lang
Taiga Jagdpanther
Heng Long Sherman DGS Firefly kit
Tamiya King Tiger (unbuilt)
Mato all metal Panzer III
1/10 Jagdpanther