3 King Tigers Heavy artillery

Spartan tracks · Post by **Spartan tracks** » Mon Jul 11, 2016 7:48 pm

Well a bit more progress all three KTs are at the same level and have been sealed with two Coates of flat varnish including shading on wheels and rear panel and sealing with two Coates of flat varnish, The hulls have had two Coates of Dark Yellow on now and are no longer flat black,although now being a lighter color on close inspection 15 suspension arms are cracked and will need replacing, The tracks have 3 Coates on and just need weathering,So if a good day tommorow I will start the camo. Regards Andy

Ad Lav · Post by **Ad Lav** » Mon Jul 11, 2016 8:00 pm

Quick work Andy!

Spartan tracks · Post by **Spartan tracks** » Tue Jul 12, 2016 2:28 pm

This will be my last update for a while as health problems have escalated regards Andy

This is at the end of yesterday after first coate of camo, the green will be much darker when finished but you get the idea.

Ad Lav · Post by **Ad Lav** » Tue Jul 12, 2016 3:10 pm

Looking smart.

Have a rest Andy.

jtracks · Post by **jtracks** » Tue Jul 12, 2016 4:41 pm

I like the way you are giving them a different look, (missing fenders). Take it slow.

Post by **HERMAN BIX** » Wed Jul 13, 2016 10:24 am

Best of luck mate, you better get back home ASAP , im thinking of rolling around & rearraging you paint pots into non- sequential numbers !!

Spartan tracks · Post by **Spartan tracks** » Wed Jul 13, 2016 10:29 am

Thanks guys and HERMAN your eye sight is far to good

Spartan tracks · Post by **Spartan tracks** » Wed Jul 13, 2016 1:36 pm

Managed a few mins this morning.

Hi guys just a quick post on this KT trial refit prior to camo,the tracks are up against the fenders and I can't work out why any ideas, I've had an update consultant brought appointment forward to this Friday,this is to discus the way forward to get the issues sorted Asaph. Andy

PainlessWolf · Post by **PainlessWolf** » Wed Jul 13, 2016 3:48 pm

Good morning,
I stepped over and took a couple of quick shots of the HL Porsche King Tiger and it seems that mine is the same way. I've never noticed any issue running it. I think that when it comes time for this one to be rebuilt, I will file and sand off about half of the vertical thickness of those fenders for scale appearance and to make a little room.
regards,
Painless

Spartan tracks · Post by **Spartan tracks** » Thu Jul 14, 2016 3:51 pm

Manged a little work after hospital today on KT 1 and KT 3 which was the won which I gave the most fender damage to.

RC Tank Warfare community hobby forum

3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery

Re: 3 King Tigers Heavy artillery