IBU3

[Tankbear]

Very nice presentation Tankbear I can only say this in response , one include the tray and have the post pak ready .......... .

Nice presentation I thought a made a mess forgetting to plug the motors in then batteries going flat

Also managed to rip the traverse servo off it's bracket in the Leo setting it up, small glitch in the test mode sent the turret spinning and levelling everything on the workbench until the bracket gave way

But got to find these issues so doesn't happen to your tanks

Ian.

[BarryC]

Very impressive Ian!

Barry

[Tankbear]

Very impressive Ian!

Barry

I can't take the credit TheIBUMan has done all the hard work. I'm only road testing it, and finding the longest road

[Big N00b]

Very impressive to both of you!!

Run up against any issues that would push back availability at all?

Any idea on release time line yet?

Thanks.

Terry

[atcttge]

! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !

OMG....

IBU3 sounds so perfect for wot I need.

When are you going to test the gun stabilization?

[Tankbear]

Very impressive to both of you!!

Run up against any issues that would push back availability at all?

Any idea on release time line yet?

Thanks.

Terry

Hi Terry,

Yes identified some issues but all appear to be firmware or software related so on a positive note that shouldn’t delay manufacture of the hardware.

Currently there is a batch of IBU2 on the production line so I guess looking at March earliest but that’s just my guess.

[Tankbear]

! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !

OMG....

IBU3 sounds so perfect for wot I need.

When are you going to test the gun stabilization?

Good to hear.

Main focus is getting the IBU3 fully tested and issues sorted then making available. Once that is done and settled down it will be the GSU, but don’t worry the GSU is already well on design/prototype stage so hopefully won’t be long too wait.

[The Tank Man]

I can't wait for the IBU3 to be avalible after testing and finaly out!out for us tank nut's to buy it is what the Challenger tank was made for!

[Tankbear]

I really like the new motor sounds! Do you think Ibu2's firmware will be updated to be able to play sounds like that?

I don't know, I'll ask manufacturer. But even if it can be done it will be low priority until the IBU3 is fully launched and any issues rectified.

Had an answer and no the hardware of the IBU2 cannot support the features used in the IBU3.

[Tankbear]

I can't wait for the IBU3 to be avalible after testing and finaly out out for us tank mut's to buy it is what the Challenger tank was made for!

I be bringing it to the MAD tank meeting (at Longbridge) this Sunday so all can have a play. Still a lot of work to be done on sounds as all new sounds are been created and there are a lot of tanks! But like the IBU2 users can create there own sounds and transfer to the IBU3.