fiber optic cable

[tanker 242]

What is the best way to connect fiber optic cable to an l.e.d bulb ? Anyone know the best way thanks tanker 242

[ALPHA]

Best way I've found is to make a housing for the LED out of brass tube...you can use what you like...You don't really want to use any fast setting glues..the vapor can cloud the optic...what you want to do is just suspend the optic in the tube and use a white glue or silicon to secure it....cutting fiber optic is the real trick...if done incorrectly the light will not shine all the way through it's recommended that you heat the end using a soldering iron....no...you do not touch the end to the iron...but just hold it close enough to where it starts to shine let it cool and you should be good to go

ALPHA

[tanker 242]

Thanks alpha, I will give your way a try when I get the fiber optic cable tomorrow from a hobby shop I know not far from me ,they sell it in a roll at various prices depending on the diameter it is called hobbies hobbies in west Norwood.tanker 242

[ALPHA]

It's good stuff to work with....can get a tad gnarly if you run too many strands...but the effect is worth it...just think of it...with one bulb...you could light your entire tank ...

ALPHA

[tanker 242]

Thanks alpha I now have a working m/g in the shield on top of my stug 3 instead of on the drivers vision slot.tanker 242 .

[ALPHA]

Thanks alpha I now have a working m/g in the shield on top of my stug 3 instead of on the drivers vision slot.tanker 242 .

That's a good way to deal with it...careful drilling out the gun barrel ...think you will end up with fine results


ALPHA