Wiring For Gearbox

[Uncarina]

I just purchased an Ultimate Edition II gearbox for my HL Abrams. Do I only need to solder the positive and negative wires to the gearbox, or is there something else I need to do? I ask because there appears to be other wires soldered to each terminal and to the gearbox body on the original gearboxes.

Thanks! Tom

http://tankarmy.com/heng-long-tank/prod ... -kv-p-1566

[ALPHA]

Greets Ucarina .....this thread might be of help to you....NG had similar problems with his gearboxes..
viewtopic.php?f=195&t=18477


Good Luck

ALPHA

[tomhugill]

I just purchased an Ultimate Edition II gearbox for my HL Abrams. Do I only need to solder the positive and negative wires to the gearbox, or is there something else I need to do? I ask because there appears to be other wires soldered to each terminal and to the gearbox body on the original gearboxes.

Thanks! Tom

http://tankarmy.com/heng-long-tank/prod ... -kv-p-1566

Hi Tom,

I think those motors are internally suppressed. So you just need to attach the positive wire to one terminal and negative to the other. Test which terminals which, if you get them the same way on each motor you'll be fine.

[Uncarina]

Thanks very much for your replies! All systems are working well.

Happy Holidays, Tom

[ALPHA]

TERRIFIC!!!!!!!!!!!!!!!!!!!

ALPHA