Taigen 1:16th RC Tanks....

[jarndice]

I have no idea how to open a Taigen Panzer 4 BUT I do know that the AERIAL is NOT included in the TAIGEN or HENG LONG Panzer 4 indeed the only Aerial that was ever included was when the Tanks used the Analogue Transmitter/Receiver. But that was in the wrong position.
Now that the Tanks are Digital if you want an authentic Aerial then you should go on line for one,
The Panzer 3 and the Panzer 4 Aerial and their mounting fittings are identical if you are fitting the Aerial on the side of the body and using the stowage tray fitting,
The Panzer 4 depending on which type letter designation it was, could have an Aerial mount in other parts of the Tank,
"Left hand rear corner" looking from the back,
"On the top of the Turret" was another place it could be fitted.
but the usual place was halfway up the left side of the body (looking from the front) slightly in front of the second roller from the front.
I got mine from -
http://www.welshdragonmodels.co.uk
But you can get one from
http://www.rctank.de
Go to the Accessories and scroll down to Panzer 3. 11.90 Euros.
shaun.

[Max-U52]

To open the tank you must remove the screws from the bottom.

[Roboticus_Prime]

Also how do I know when the battery is charged fully ?

Thanks again... Andy

I use this. I Bought mine from my local hobby shop for ~$25.

http://www.amazon.com/Duratrax-ONYX-100 ... B002GOWY8E

[Max-U52]

For nimh you can't go wrong with Onyx. I have the 240 dual charger and it's just great. Four different speeds of charge and it has a nice loud alarm for when it's charged, then it maintains a trickle to keep full charge until I'm ready to use it. And being the dual it charges two at once. A bit pricey at $90 from the LHS but you can find them online for less.