If it is...Why make it bigger?
ALPHA
Abrams V3???
Abrams V3???
If it is...Why make it bigger?
ALPHA
-
jackalope
- Lieutenant
- Posts: 3882
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: Abrams V3???
Because everyone knows bigger is better! 
We had maybe 50 in our rail yard about a year ago, wish I knew you'd wanted pics back then I could have gotten you whatever you needed.
We had maybe 50 in our rail yard about a year ago, wish I knew you'd wanted pics back then I could have gotten you whatever you needed.
Re: Abrams V3???
There is a pic that eludes me...Giant and I were talking about this baby...the more I look at it...the more impractical it isjackalope wrote:Because everyone knows bigger is better!
We had maybe 50 in our rail yard about a year ago, wish I knew you'd wanted pics back then I could have gotten you whatever you needed.
ALPHA
-
greengiant
- Warrant Officer 2nd Class
- Posts: 1138
- Joined: Tue Jun 26, 2012 12:15 am
Re: Abrams V3???
Jackolope your saying you say fifty Abrams of this configuration at close to one time?
-
jackalope
- Lieutenant
- Posts: 3882
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: Abrams V3???
No idea if any were this type or not never took the time to check them all out, sorry if I wasn't clear.
We've had M1's, Bradley's, tank recovery vehicles, Humvees, those new bomb proof Humvee replacement things, tanker trucks and even the huge Army tractor trailer cab, sorry can't recall it's name. If it's shipped over seas at one time or another it's been in our rail yard.
We've had M1's, Bradley's, tank recovery vehicles, Humvees, those new bomb proof Humvee replacement things, tanker trucks and even the huge Army tractor trailer cab, sorry can't recall it's name. If it's shipped over seas at one time or another it's been in our rail yard.
Re: Abrams V3???
It's the CATTB M1 prototype. CATTB stands for Component Advanced Technology Test Bed. It's a prototype M1 to test a 140 - yes, ONE FORTY - millimeter main gun. There's a Leo2 prototype out there that also tested the 140mm gun. It's an old test bed, in the 1990s I think. Probably brought out to be rebuilt into an M1A2 SEP or reused to test technologies that will be found on future M1 versions or new tank altogether.
M1A2 SEP v3 will not be looking like that IIRC. The modifications to make a v3 wouldn't be "too drastic" IIRC. No idea if v3 includes an active protection system like Iron Fist on the Merkava.
EDITED TO ADD:
OOPS! It's not the CATTB apparently. CATTB has a completely different turret profile. Digging up an old thread at TN reveals that it's an ATAC (Advanced TAnk Cannon) systems demonstrator vehicle which mounts a 140mm gun and autoloader (because 140mm is quite BIG).
Take note the blocks on the turret face in the photos posted by Alpha. Those are NOT additional armour, but steel plates to simulate the WEIGHT of heavier armour, or to redistribute weight. Those steel plates have been found on other M1s such as the M1A2 prototype.
This is the Leo 2 140mm prototype:
140mm was conceived because they thought that they needed it against the next generation of Russian tanks. But improvements in 120mm APFSDS rounds, coupled with the weight and size of 140mm rounds (requiring an autoloader and less rounds vs. 120mm) meant that 140mm was not adopted.
M1A2 SEP v3 will not be looking like that IIRC. The modifications to make a v3 wouldn't be "too drastic" IIRC. No idea if v3 includes an active protection system like Iron Fist on the Merkava.
EDITED TO ADD:
OOPS! It's not the CATTB apparently. CATTB has a completely different turret profile. Digging up an old thread at TN reveals that it's an ATAC (Advanced TAnk Cannon) systems demonstrator vehicle which mounts a 140mm gun and autoloader (because 140mm is quite BIG).
Take note the blocks on the turret face in the photos posted by Alpha. Those are NOT additional armour, but steel plates to simulate the WEIGHT of heavier armour, or to redistribute weight. Those steel plates have been found on other M1s such as the M1A2 prototype.
This is the Leo 2 140mm prototype:
140mm was conceived because they thought that they needed it against the next generation of Russian tanks. But improvements in 120mm APFSDS rounds, coupled with the weight and size of 140mm rounds (requiring an autoloader and less rounds vs. 120mm) meant that 140mm was not adopted.
Re: Abrams V3???
Is this the same one?
This one here looks interesting...says it was the prototype for the current version
Maybe they should have left it like that...looks cooler lol
ALPHA
This one here looks interesting...says it was the prototype for the current version
Maybe they should have left it like that...looks cooler lol
ALPHA
Re: Abrams V3???
The first four pix are that of the CATTB. It's different from Thumper, the ATAC demonstrator subject of this thread. The last photo is the Chrysler prototype of the XM1.
Re: Abrams V3???
The last one looks like it had better ground clearance...also a lower profile...but it's hard to tell without a side to side comparisonatcttge wrote:The first four pix are that of the CATTB. It's different from Thumper, the ATAC demonstrator subject of this thread. The last photo is the Chrysler prototype of the XM1.
ALPHA
