Kiaser wrote:Yes mute point lipo better but still lithium
Lithium ion is:
Higher in energy density.
Cheaper to manufacture.
But:
Heavier.
More rigid in shapes and styles.
More internal resistance, for slower discharging, and lower amperages.
Has greater aging, even if not used for 1 year.
More explosive, so requires an IC circuit.
Lithium polymer is:
Lighter.
Moulderble, and flatter shapes.
Less internal resistance for faster discharging and higher amperages, at up to 65C continuously, or 135C in bursts!!!
By comparison, a typical RCR chemistry 18650 can only discharge at up to 5.8 amps.
While an IMR chemistry 18650 at 2000 mAH will discharge at up to 10 amps, though an IMR chemistry 18650 at a puny 1600 mAH can discharge at up to 15C, but for the diminished capacity.
Has less shelf aging, even if not used.
Less explosive, so no IC circuit required.
But:
Less energy density.
Expensive to manufacture.
No its a point not a mute point to disregard another's post this way is rude kaiser you could use a lesson in manners
have to admire the up sell
Message received 
