Matorro to H/L conversion HELP neded

[tankman]

HELP has anyone got a wiring schematic for the Matorro King Tiger. I have removed the old Matorro electronics and put in an RX14 board I have sorted the drive motors, turret rotation barrel elevation and front light. What I need is how to connect up the air soft unit. So can anyone give me an idiots guide to connecting Matorro wiring to H/L wiring. Also the front machine gun do I have to change the LED as everytime I connect it it glows but will not flash in scync with the machine gun sound. All the best for now
Alan

[tankman]

Hi guys panic over. Got the KT running at last. For anyone who is intrested here is the way I did it :-

Matorro wiring               Heng Long wiring

red            to          green
                                            =  front light
black          to          white



yellow        to          red                                          = turret rotation
blue           to          black



brown      to          blue                                          =elevation motor
green         to        brown

white        to          yellow      = shot motor  ( also goes to on/off switch in turret )


a blue wire connects shot and elevation motors

Hope this is of some use to you. All the best for now
Alan                                         

[aussieharry]

hello tankman, this looks great. but i need Matorro to H/L conversion help for the same problem, only with the rx18 henglong unit to matorro. maybe you have this to. if. yes, could you please make a scatch drawing for me.i'm not a lizzard in electronic.
thank you for your attention
regards
harry