Rx 18 question

Feel free to discuss anything and everything to do with tanking here!
Post Reply
User avatar
Rocketman
Sergeant
Posts: 604
Joined: Tue Sep 30, 2008 5:17 pm
Location: Surrey Hills
Contact:

Rx 18 question

Post by Rocketman »

Hi guys

I've given up on this damned flash unit it's more trouble than it's worth.

An idea occurred to me though. Which are the two pins on the cn3 that go to the main gun to get it to fire? None of the rx 18 diagrams show these pins functions . I was thinking there might be enough voltage to wire an led in there much the same as the two pins for the machine gun? And then any idea of the voltage that would come off of it? Might be a simple solution?
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Rx 18 question

Post by ALPHA »

Not sure this will help much Rocketman
but this is the diagram provided by Mato for the flash upgrade
Image

ALPHA
User avatar
greengiant
Warrant Officer 2nd Class
Posts: 1138
Joined: Tue Jun 26, 2012 12:15 am

Re: Rx 18 question

Post by greengiant »

You need to have a second 8 pin connector to run the 8 pin connector to and a recoil unit with its micro switch. Its the same setup as HL.
User avatar
Rocketman
Sergeant
Posts: 604
Joined: Tue Sep 30, 2008 5:17 pm
Location: Surrey Hills
Contact:

Re: Rx 18 question

Post by Rocketman »

Argh bugger! Now have the flash unit working perfectly!

All I wanted was the gun sound and flash, nothing more. All I had to do was wire the micro switch permanantly shut, pull on the stick and hit the k button. Voila!

I have the entire rx18 rig out of the tank at present so no idea as to the engine recoil effect.
User avatar
wibblywobbly
Major
Posts: 6396
Joined: Fri Oct 17, 2008 9:30 am
Location: South Wales Valley
Contact:

Re: Rx 18 question

Post by wibblywobbly »

Is this what you were after?

viewtopic.php?f=79&t=14070
Tiger 1 Late
Panther G
King Tiger
M36 B1
User avatar
Rocketman
Sergeant
Posts: 604
Joined: Tue Sep 30, 2008 5:17 pm
Location: Surrey Hills
Contact:

Re: Rx 18 question

Post by Rocketman »

Hi wobbly, thanks for that.

I just wanted folks to know that you can have the muzzle flash by simply shorting those pins on cn3 even if you have an old airsoft unit. If I'd had this info a month ago this model would have been done by now!

So for future ref if you just want to fit a flash unit to ANY age of tank:

1) fit the five pin plug into cn3
2) cut the end off the two pin plug coming off the five pin and wrap wires together.
3) you can now trigger the flash with the left stick along with the bang sound!

Simples.
User avatar
rayzzer-b
Corporal
Posts: 300
Joined: Fri Aug 16, 2013 11:47 am
Location: southampton hampshire uk.

Re: Rx 18 question

Post by rayzzer-b »

Hi yep i dun this mod years ago you have two neg.and a pos.. on c3 connector .. you only need 3 wires to make it all work one neg goes to motor recoil one to neg on led flash and pos goes to motor recoil linked to led not a hard mod to do as long as you have the micro switch to control neg contacts for led/recoil ..pushing left stick forwards triggers led flash and recoil :thumbup: ray.
time that's all it takes ,, TIGER 1,TIGER 2, PANTHER G, PANZER 4,KV1,T34,M3,M16,M4,M26,,251,CHAL
Post Reply

Return to “General Discussion”