If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
There SHOULD be lots of differences between an H and an L.
The Tauch panzer was an amphieous tank and the equipment on the side is a breather tube.
The most obvious changes:
Square shaped MG mantlet(E-H) - changed to round on the J and beyond.
Different main gun and mantlet.
Thinner add-on armour plates on the H.
The exhaust should be different on the Tauch Panzer as it was valved to stop water getting in. Very similar to that fitted to the ausf M.
Engine deck hatches should be mounted transverse on the H. Changed to inline from J onwards.
Additional armour plates added to rear panel of tank above the exhausts from J to L.
50mm armour plate added to protect the exhausts from J to L.
Vision ports on side of turret changed from J on.
Drivors vision block changed.
I am wanting to convert one to an ausf F without the turret bin some day.
Cheers
Tim
1/6 Armortek Panther ausf.G 1/6 Armortek Panzer III ausf.J 1/6 Type 82 Funkwagen 1/6 Sdkfz 250/9 1/6 Sdkfz 2 Kettenkrad
Good Morning,
I am using a 'Tauch' Panzer's upper deck as part of a StuG III Ausf B build I am putting together. Hatches and fittings are much closer than the other Pz III.
regards,
Painless