monster challenge!

Feel free to discuss anything and everything to do with tanking here!
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

monster challenge!

Post by Giganaut »

here, i found a russian beast other than the overrated P.1000 Ratte and the P.1500 Monster ultra heavy tank projects..

i present to you, the Osokin heavy tank cruiser. which comprises of 4 T-34-76 hulls and a main hull in the middle.

Image

[QUOTED FROM ARCHIVE AWARENESS]

Oh yes. It's like that crazy fake KV-VI project, except someone actually thought that this was a good idea. Someone that should know better, too. Osokin wasn't some kind of peasant, he was an Engineer-Lieutenant-Colonel. Of the VVS, though, so hopefully his airplane engineering was at least a little bit more realistic. Let's look at the statistics of his beast.
Combat mass, with armament: ~270 tons
Armament and ammunition:
guns: 2*152 (160-200 shells), 5*76 (650-800 shells), 2*23 (1200 shells)
machine guns: 3*12.7 (4500 rounds), 14*7.62 (26460)
Armour thickness (in various places): 40-125 mm
Engines: aircraft M-30 or M-40
Total horsepower: 4000-6000 hp
hp/ton: 13.3-22
Area of tracks in contact with ground: 43.4 meters squared
Ground pressure: ~0.7 kg/meter squared
Maximum speed: 36-40 kph
Minimum speed: 4.2 kph
Performance:
elevation: up to 40 degrees
vertical obstacle: up to ___ meters
crossable trench: 9 meters
fording depth: 1.8 meters
Fuel capacity: 8400 kg of diesel
Operational range: ~600 km
Crew: 30
Amount of transportable infantry: 50
Water hazards can be crossed using attachable pontoons of the Epron type (soft or rigid).

Well, it looks like he stapled 4 T-34 model 1940s to two T-100-Zs and called it a day. Oh, also, this monster is 21.45 meters in length and 9.7 meters in width. You would think that an air force officer would be aware of what a juicy target this would represent. I guess that's what the 5 AA guns are for. The Red Army was also unimpressed with the project, and it disappeared into the archives.

Giganaut made a 3D model of this thing, and made it sillier in the only way possible.

Image
Image
Image
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: monster challenge!

Post by Giganaut »

and apperantly that the engines are the ones between the T-34s when i modeled it. and not in the T34 itself
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: monster challenge!

Post by ALPHA »

Giganaut wrote:and apperantly that the engines are the ones between the T-34s when i modeled it. and not in the T34 itself
So forseeably the tank could be shorter.. as you wouldn't need the rear portions of the T34s NO? ;)

ALPHA
Last edited by ALPHA on Sun Oct 05, 2014 2:55 pm, edited 1 time in total.
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Re: monster challenge!

Post by jackalope »

Thats just dumb! Had it been built it would have made a PERFECT target for EVERY freeking plane in the air!
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: monster challenge!

Post by ALPHA »

jackalope wrote:Thats just dumb! Had it been built it would have made a PERFECT target for EVERY freeking plane in the air!
:haha: :haha: :haha: probably why it was only made on paper :haha:

ALPHA
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: monster challenge!

Post by Giganaut »

ALPHA wrote:
Giganaut wrote:and apperantly that the engines are the ones between the T-34s when i modeled it. and not in the T34 itself
So forseeably the tank could be shorter.. as you wouldn't need the rear portions of the T34s NO? ;)

ALPHA

cause russians must have big and glorious comrade weapons to scare facist german tanks XDD
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: monster challenge!

Post by Giganaut »

jackalope wrote:Thats just dumb! Had it been built it would have made a PERFECT target for EVERY freeking plane in the air!

and awesome for parade purposes
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Re: monster challenge!

Post by jackalope »

I'm beginning to seriously think some of these generals and Mr.Hitler (BIG TIME) must have had the genitals of a gnat as they all MUST have the BIGGEST gun they can find! Come on guys don't make it so obvious that your hung like a fly! :haha:

150mm guns on a tank come on now, or better yet 2 150mm guns! :haha: "Look at how BIG and POWERFUL my guns are ladies" :/ Geeezzzzz.
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: monster challenge!

Post by Giganaut »

jackalope wrote:I'm beginning to seriously think some of these generals and Mr.Hitler (BIG TIME) must have had the genitals of a gnat as they all MUST have the BIGGEST gun they can find! Come on guys don't make it so obvious that your hung like a fly! :haha:

150mm guns on a tank come on now, or better yet 2 150mm guns! :haha: "Look at how BIG and POWERFUL my guns are ladies" :/ Geeezzzzz.

more like hung like an amoeba XD And yes, russians had that "more guns more power more GLORY TO MOTHERLAND!"
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
User avatar
Giganaut
Corporal
Posts: 333
Joined: Thu Aug 28, 2014 10:04 am
Location: Brunei

Re: monster challenge!

Post by Giganaut »

all in all, who would voulenteer in building this beast in 1:16 scale XDD
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Post Reply

Return to “General Discussion”