.....
Re: planet 5 reciever
Ive 5and 6 channel rxs they re both straight fits on my tams
Re: planet 5 reciever
.....
Last edited by cannedheat on Sun Nov 23, 2014 12:33 pm, edited 1 time in total.
Re: planet 5 reciever
Be careful with that receiver i think the pin set up is different from the larger planet receiver, i may be wrong but have a look at this info, can't remember which site i got it from
PLANET R4MsJ 4CH 2.6G 2.4GHz RECEIVER
£14.99
PLANET R4MsJ 4CH 2.6G 2.4GHz RECEIVER
Click to enlarge
Product Information
Weight - 2.6g
Size - 33 x 18 x 7mm
Channels - 4
Voltage - 4.8-6.0V
Connector type - JST-ZHR (Centre pin negative) (Inner pin signal)
Case - Lightweight
Modulation type - Advanced 2.4GHz
NOTE : THIS RECEIVER IS DESIGNED TO BE USED WITH THE JST-ZHR SERVO CONECTOR
ALTERNATIVELY SHOULD WISH TO USE STANDARD SERVO CONNECTOR AN ADAPTOR IS AVAILABLE FROM SPEKTRUM
PLANET R4MsJ 4CH 2.6G 2.4GHz RECEIVER
£14.99
PLANET R4MsJ 4CH 2.6G 2.4GHz RECEIVER
Click to enlarge
Product Information
Weight - 2.6g
Size - 33 x 18 x 7mm
Channels - 4
Voltage - 4.8-6.0V
Connector type - JST-ZHR (Centre pin negative) (Inner pin signal)
Case - Lightweight
Modulation type - Advanced 2.4GHz
NOTE : THIS RECEIVER IS DESIGNED TO BE USED WITH THE JST-ZHR SERVO CONECTOR
ALTERNATIVELY SHOULD WISH TO USE STANDARD SERVO CONNECTOR AN ADAPTOR IS AVAILABLE FROM SPEKTRUM