Problems with a heng long king tiger

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Problems with a heng long king tiger

Post by ALPHA »

Rocketman62 wrote:Hi, I have a King Tiger with a Porsche turret. It's the BB version but does not work at all, I have taken the upper hull off and noticed two wires with connectors coming from the BB unit that are not attached to anything!! They consist of two wires and three wires, can anyone tell me where they connect to or where to look to solve the problem.

Thanks
The wires could be for the recoil sensor for the sound/gearboxes...it usually is soldered to a micro switch... though it's hard to say... you got any photos Rocketman?

ALPHA
Top
User avatar
Lord Haw-Haw
Private
Posts: 77
Joined: Sun Nov 10, 2013 9:24 pm

Re: Problems with a heng long king tiger

Post by Lord Haw-Haw »

Zmader22 wrote:Just bought a king tiger and right out of the box the gun will not fire the bb's tried everything and can't fined a diagram to take it apart I can c all the screws just alittle worried about taken it apart so the ? Is is there any diagrams for taken it apart to solve the problem any any suggestions
Any updates on your beast?

Here's update on my KT.
For anyone wanting their L/71 too kick-ass.
Resleeved with a 6.03mm brass barrel, lathed on drill press for proper taper and airsoft fit, same length as original.
New Taigen shooting unit.
Used a press-fit/glued on Taigen brass muzzle break (didn't need too thread the end).
Results are: flat trajectory out to 25-30ft!, straight as an arrow! Best shooter I've got! The L/71 is still king!
Attachments
photosm.jpg
photosm.jpg (163.71 KiB) Viewed 3343 times
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Problems with a heng long king tiger

Post by ALPHA »

Lord Haw-Haw wrote:
Zmader22 wrote:Just bought a king tiger and right out of the box the gun will not fire the bb's tried everything and can't fined a diagram to take it apart I can c all the screws just alittle worried about taken it apart so the ? Is is there any diagrams for taken it apart to solve the problem any any suggestions
Any updates on your beast?

Here's update on my KT.
For anyone wanting their L/71 too kick-ass.
Resleeved with a 6.03mm brass barrel, lathed on drill press for proper taper and airsoft fit, same length as original.
New Taigen shooting unit.
Used a press-fit/glued on Taigen brass muzzle break (didn't need too thread the end).
Results are: flat trajectory out to 25-30ft!, straight as an arrow! Best shooter I've got! The L/71 is still king!
:clap: :clap: ................... :haha: :haha:

ALPHA
Top
Post Reply

Return to “General Questions”