Help with hull of HL Tiger

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
User avatar
Plumbguy
Private
Posts: 58
Joined: Sat Jun 21, 2014 8:19 am

Help with hull of HL Tiger

Post by Plumbguy »

Hi guys, I'm trying to get the hull up but some pipes at the back are stopping it what do I do? It's the first time I've tried to open it
I LOVE my HL Tiger I and Tiger II
User avatar
jarndice
Colonel
Posts: 8398
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Re: Help with hull of HL Tiger

Post by jarndice »

Hallo old friend, I imagine you mean the Engine air inlet pipes going into and out of the Feifel air cleaners? Grasp one of the plastic pipes coming out of the air cleaner (don't worry they are supposed to move)and pull the pipe off of it, It is not glued, if your pipes are held in place by a pair of clamps you will see on the top of each clamp two screw heads, they are small but they really are screws, undo them with CARE!!! And lift them free you will then be able to get more purchase. when you have done all that you might want to think about replacing the pipes with something less rigid. come back here and some one will tell you how and what to buy if you do. Hope that helps. shaun
I think I am about to upset someone :haha:
User avatar
Plumbguy
Private
Posts: 58
Joined: Sat Jun 21, 2014 8:19 am

Re: Help with hull of HL Tiger

Post by Plumbguy »

Thanks I've got in but the front is held down, the back is up but something is holding it down, I've looked on the bottom of the hull but no screws are there? Only the four at the back?
I LOVE my HL Tiger I and Tiger II
User avatar
jarndice
Colonel
Posts: 8398
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Re: Help with hull of HL Tiger

Post by jarndice »

Hi, Where the TRACKS run, if you look there you will see more screws, a lot of us change all the screws for NEODYMIUM MAGNETS (rare earth) to clamp the two halves together, TYPE MAGNETS in the search box on the top right hand side of this page click on search and you will see advise on how to do it. shaun
I think I am about to upset someone :haha:
User avatar
Plumbguy
Private
Posts: 58
Joined: Sat Jun 21, 2014 8:19 am

Re: Help with hull of HL Tiger

Post by Plumbguy »

thanks, I'm opening it up for that just to mark where they will go, I've ordered some and should be arriving soon :)
I LOVE my HL Tiger I and Tiger II
cannedheat

Re: Help with hull of HL Tiger

Post by cannedheat »

1 front centre underneath ?
User avatar
Plumbguy
Private
Posts: 58
Joined: Sat Jun 21, 2014 8:19 am

Re: Help with hull of HL Tiger

Post by Plumbguy »

I can't find any more screws near the tracks? I think there's another two?
I LOVE my HL Tiger I and Tiger II
User avatar
jarndice
Colonel
Posts: 8398
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Re: Help with hull of HL Tiger

Post by jarndice »

Plumbguy if you type "OPENING A TIGER" in the search box on the top right hand side of this page and CLICK on SEARCH, Scroll down and you will find an entry by TKCOMMANDER that refers to BIRGERS entry about everything to do with access to all things HENG LONG TIGER 1 including opening one up. shaun
I think I am about to upset someone :haha:
User avatar
Plumbguy
Private
Posts: 58
Joined: Sat Jun 21, 2014 8:19 am

Re: Help with hull of HL Tiger

Post by Plumbguy »

Thanks I'll have a look
I LOVE my HL Tiger I and Tiger II
User avatar
tanks_for_the_memory
Sergeant
Posts: 501
Joined: Tue Jan 04, 2011 4:50 pm
Location: London

Re: Help with hull of HL Tiger

Post by tanks_for_the_memory »

Perhaps this is the new type with screws hidden behind the front spare tracks. .?
My Mid-Production Normandy Tiger 1 build thread: http://www.rctankwarfare.co.uk/forums/v ... =22&t=8350
Post Reply

Return to “General Questions”