ATAK zimmerit for HL King tiger-Opinions please

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
User avatar
tomhugill
Captain
Posts: 4881
Joined: Thu Apr 15, 2010 11:21 am

Re: ATAK zimmerit for HL King tiger-Opinions please

Post by tomhugill »

Marc780 wrote:Well you guys have never steered me wrong yet...I'm at the point where i have to fish or cut bait on this tank. Meaning mod it how i want it and be done, or put it away in a box to store or sell it. Too much time and $ into it to store, and in no condition to sell at the moment even if i wanted to. I think i'm going to have to take the plunge... :S

Regarding your pricing question the reason the taigen stuff is £10 is because its cheap rubbish. Its made of a sort of rubber and is quite course. The Atak stuff on the other hand is very very well cast resin sheets. The set comes with a replacement mantlet, turret hatch etc (on the tiger and king tiger at least). So your comparing apples and oranges. Im not sure why its costing you so much, the Atak sets in the UK are £32.50 from forgebear.
Top
User avatar
MichaelC
2nd Lieutenant
Posts: 2449
Joined: Tue Oct 16, 2012 4:03 pm
Location: Toronto, Canada

Re: ATAK zimmerit for HL King tiger-Opinions please

Post by MichaelC »

tomhugill wrote:
Marc780 wrote:Well you guys have never steered me wrong yet...I'm at the point where i have to fish or cut bait on this tank. Meaning mod it how i want it and be done, or put it away in a box to store or sell it. Too much time and $ into it to store, and in no condition to sell at the moment even if i wanted to. I think i'm going to have to take the plunge... :S

Regarding your pricing question the reason the taigen stuff is £10 is because its cheap rubbish. Its made of a sort of rubber and is quite course. The Atak stuff on the other hand is very very well cast resin sheets. The set comes with a replacement mantlet, turret hatch etc (on the tiger and king tiger at least). So your comparing apples and oranges. Im not sure why its costing you so much, the Atak sets in the UK are £32.50 from forgebear.
Tom, 32 quid is about $53USD before shipping....... So $68 sounds about right. Atak stuff is about $50 here before shipping across the pond. Expensive stuff but worth it.
Top
User avatar
dgsselkirk
Warrant Officer 1st Class
Posts: 1508
Joined: Tue Oct 16, 2012 1:57 am
Location: Kitchener, Ontario, Canada
Contact:
Contact dgsselkirk

Re: ATAK zimmerit for HL King tiger-Opinions please

Post by dgsselkirk »

ALPHA wrote:
dgsselkirk wrote:Don't hesitate, close your eyes and make the purchase. I know it isn't cheap but the finished look is worth a million bucks!
Aren't you being a little humble dgsellkirk? ... I remember the post from way back when I joined... you did your KT with a soldering iron ;)

ALPHA
Yes, I did do that but if I had to do it over I would bite the bullet and get the kit. They are so easy to work with...
"There are things in Russia which are not as they seem..."
Georgy Konstantinovich Zhukov
Top
Marc780
Corporal
Posts: 498
Joined: Wed Mar 05, 2014 1:34 pm

Re: ATAK zimmerit for HL King tiger-Opinions please

Post by Marc780 »

Thanks for all the feedback fellas! So I ordered the set from Forgebear. The long trip across the pond will give me plenty of time to sand off the putty I botched...counting on the Zimmerit to hide scratches. Good to know you get a new rear hatch, I thought the picture of it included with the Atak meant "not included". That will save me some work that and the mantle is where I put the putty.
Got a new compressor to replace the old clunker that was n't putting out pressure so, the new paint i airbrush on will be the last time I hope.

This one cost me $75 from a guy on Craigs list, in orange county Ca. a Husky He said it was new and it does look it. Of course I use it for tires and blowing dust out of computers and so on too. The last one was "oil-less" and these are only for casual use, after it finally broke I wanted to buy one compressor and be done with it for hopefully forever. This one is oil filled, 3 oz of non detergent compressor oil it holds (regular motor oil will not do it will cause carbon, and the detergent in it is bad for the compressor somehow). It's 3 gallon 1 hp takes about 90 seconds to get to 150 psi.

Image
Last edited by Marc780 on Sat Aug 30, 2014 3:42 am, edited 1 time in total.
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: ATAK zimmerit for HL King tiger-Opinions please

Post by ALPHA »

dgsselkirk wrote:
ALPHA wrote:
dgsselkirk wrote:Don't hesitate, close your eyes and make the purchase. I know it isn't cheap but the finished look is worth a million bucks!
Aren't you being a little humble dgsellkirk? ... I remember the post from way back when I joined... you did your KT with a soldering iron ;)

ALPHA
Yes, I did do that but if I had to do it over I would bite the bullet and get the kit. They are so easy to work with...
:haha: :haha: It's what I've heard... it seems to hold the paint well too :D

ALPHA
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: ATAK zimmerit for HL King tiger-Opinions please

Post by ALPHA »

Marc780 wrote:Thanks for all the feedback fellas! So I ordered the set from Forgebear. The long trip across the pond will give me plenty of time to sand off the putty I botched...counting on the Zimmerit to hide scratches. Good to know you get a new rear hatch, I thought the picture of it included with the Atak meant "not included". That will save me some work that and the mantle is where I put the putty.
Got a new compressor to replace the old clunker that was n't putting outpressure so, the new paint will be the last time I hope.
Good Luck with it Marc...it is really good stuff... a friend of mine has some on his tank... it looks very good :thumbup:

ALPHA
Top
Post Reply

Return to “General Questions”