Wires ... Do I have the right bits and where do they go?

[Markocaster]

Hi first if this is the wrong section for this sorry , I thought more would see it here.
So this is what I have to work with. Came with the tank as is.
I know nothing
I figured where the batt goes and the turret charging port , machine gun and head lights
The rest is a mystery
Can someone who knows this stuff take a look at the photos and tell me if it's worth proceeding or should I just order a Clark board and a wire set and start from scratch? Also I have no controller for the tank will any heng long one work?


Those are the overview pics of everything but the smoke unit and motors.
It's a DBC-RCv2 battle system and Heng Long multi function unit w fan.
Here are a few close up photos.




Any help is appreciated , even of you can just direct me to a good source to read etc.
this is my first try at this stuff. Cheers Mark

[ALPHA]

Will have to get back to you on that Marc... I've seen a diagram for the High intensity unit... I just don't remember where

ALPHA

[Dragon245]

You'll need a seperate transmitter and reciever HL will not work on this set up

[Dragon245]

This site may help

darkith.dyndns.org/~darkith/html/dbc.shtml

Regards Gareth

[Markocaster]

Thanks guys. I think I am going to have to pick up a fatuba
Trans/reciever and go from there

[Markocaster]

What are my options for a transmitter and receiver, should I buy a Fatuba at around $100
Or would a secondhand HL trans/receiver work? Maybe I can find something on eBay?
Or this
TAG120616 - 1/16 Taigen Complete 2.4GHz radio Set for the Tiger I model kit (TAG12501). Includes 2.4GHz radio, Main Unit with built in 2.4GHz reciever and cooling fan, Speaker unit, Wiring Harness and on/off Switch Set for the Taigen Tiger I Model Kit (TAG12501).
For $120.00
Thanks