Which lower hull?

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Which lower hull?

Post by jackalope »

So I'm looking to get a better lower hull then the Heng Long one due to the fact that I can see it flexing when I turn my Tiger. Now the only 2 that looks like are out there are the Mato and the Taigen ones and I'm stuck wondering which one would be better. The Mato one is water proof and uses all the Heng Long parts so I wouldn't have wasted any money on the metal road wheels and suspension arms I've already bought. However the Taigen lower has a torsion bar suspension AND its about $100 less then the Mato one but it isn't water proof and I won't be able to use my suspension arms I already have.

So I'm kinda stuck which lower do I go with, the Mato or the Taigen?
Top
User avatar
Lert
Sergeant
Posts: 543
Joined: Sat Apr 19, 2014 6:10 pm
Location: Duiven, Netherlands

Re: Which lower hull?

Post by Lert »

You can also brace the HL one, if you want. It's cheaper, quicker, and gives more of a "I did it myself" feel than just swapping out a hull.
JagdPanther / Leopard 2A6 / StuG Ausf. G / KV-2 / M4A3A4 / MTLB / 2.5 ton truck 6x6
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Which lower hull?

Post by ALPHA »

:haha: If you want super stiff and rigid... go with the mato ...if you want torsion suspension go with the Taigen...but since you already have the suspension arms and wheels... go with the Mato for sure.... with the Taigen half of what you already have in hand will be wasted ;)


ALPHA
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Which lower hull?

Post by ALPHA »

Lert wrote:You can also brace the HL one, if you want. It's cheaper, quicker, and gives more of a "I did it myself" feel than just swapping out a hull.
Yup :D

ALPHA
Top
User avatar
jarndice
Colonel
Posts: 8398
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Re: Which lower hull?

Post by jarndice »

Jack, I understand your reluctance to buy the Taigen when you already have the HENG LONG suspension, but I have found that TAIGEN product quality is better than MATO and right now FORGEBEAR is selling a TAIGEN hull as well as wheels and axles, so you know the supplier is trustworthy. Good luck with your choice. shaun
I think I am about to upset someone :haha:
Top
User avatar
MichaelC
2nd Lieutenant
Posts: 2449
Joined: Tue Oct 16, 2012 4:03 pm
Location: Toronto, Canada

Re: Which lower hull?

Post by MichaelC »

The money you have to shell out for the Mato metal hull is basically the same as paying for the Taigen metal lower and metal road wheels so it is a wash. I can tell you from my experience that the Mato metal lower, although is solid and you can probably kill someone with one swing of it, is very crude and has a very stiff springs and the metal arms don't move very freely. I owned one when they first came out and the tank never ran properly. I have since switched to a Taigen hull and is much happier and very impress with it.

MichaelC.
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Which lower hull?

Post by ALPHA »

I think Micheal is has the most expertise in this inquiry... :D

ALPHA
Top
User avatar
jackalope
Lieutenant
Posts: 3882
Joined: Fri Jun 20, 2014 7:42 pm
Location: Communist State of Maryland, United States.

Re: Which lower hull?

Post by jackalope »

Mato is saying alot of its stuff is 2.0 so I'm guessing its been updated. But I don't like hearing it may not run right, thats what I have now!

Ok so will my early road wheels that I have fit the Taigen lower and its suspension? If so the I guess I'll just eat the metal suspension arms I already have.

Also what about a idler wheel tensioner system, will I need one with the Taigen hull?
Top
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Which lower hull?

Post by ALPHA »

jackalope wrote:Mato is saying alot of its stuff is 2.0 so I'm guessing its been updated. But I don't like hearing it may not run right, thats what I have now!

Ok so will my early road wheels that I have fit the Taigen lower and its suspension? If so the I guess I'll just eat the metal suspension arms I already have.

Also what about a idler wheel tensioner system, will I need one with the Taigen hull?
I'm not sure about the Mato Jack...here's forgebears auction page for the Taigen...you can clearly see the rear idler tensioner
http://www.ebay.co.uk/itm/Taigen-1-16-S ... 58b1ceb3a9
Think your metal wheels will work if anything maybe shimming or drilling to take up clearances might be needed ;)

ALPHA
Top
User avatar
PainlessWolf
Lieutenant-Colonel
Posts: 7668
Joined: Sun Feb 26, 2012 9:09 pm
Location: Southern Colorado Rocky Mountains

Re: Which lower hull?

Post by PainlessWolf »

Jackalope,
Taigen\Asiatam's hull should work with the road wheels that you have. You may have to do some work to make the axles on them fit the grub screw method of attachment that Taigen uses. You will not need to purchase a separate Idler wheel tensioner, I believe. http://www.artistichobbies.com/proddeta ... =TAG120018 or http://www.rctank.de/NEW-Tiger-I-metal- ... ith-rubber
regards,
Painless
...Here for the Dawn...
Top
Post Reply

Return to “General Questions”