moin
we working on a lidel detail for the roadweels, some new rubertires. At the moment thay are not perfect, we need to change something on the molds but this is the privview .
cu christian
Cromwell 1:16 scratchbuilt
Re: Cromwell 1:16 scratchbuilt
Re: Cromwell 1:16 scratchbuilt
That's a great build
I like it even more - because it has 1st Polish Armoured Division insignia.
I like it even more - because it has 1st Polish Armoured Division insignia.
Re: Cromwell 1:16 scratchbuilt
moin
new parts for my cromwell
.
cu christian
new parts for my cromwell
.
cu christian
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Cromwell 1:16 scratchbuilt
A good add-on, Chris. I see you also have another new offering in the form of the Position Lamp. I shall be buying these items in the near future. Just out of interest, did you use 2-part epoxy to bond the shackles and lamp to the styrene? I have found that CA superglue bonds are apt to shear in these circumstances, when under pressure...but epoxy works well.
For other interested in the new bits, I am posting a direct link to your site.
http://www.ludwigs-hobby-seite.de/cromwell_1.htm
For other interested in the new bits, I am posting a direct link to your site.
http://www.ludwigs-hobby-seite.de/cromwell_1.htm
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Cromwell 1:16 scratchbuilt
hi
thank you
super glue works well, epoxi i use too much. at my cromwell i used super glue and will put in some bolds around like the original so a real towing schould be no problem .
cu christian
thank you
super glue works well, epoxi i use too much. at my cromwell i used super glue and will put in some bolds around like the original so a real towing schould be no problem .
cu christian