opening heng long tiger 1
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
-
- Recruit
- Posts: 28
- Joined: Sun May 04, 2014 7:56 am
opening heng long tiger 1
How do you open up the heng long tiger 1 new version with smoke and sound?
Re: opening heng long tiger 1
There should be eight screw points under the tank...and and if I remember correctly four under the tracks...take them all out...put all except for four... away for spares... use the four to lock the tank back up... two in the front two in the back... that way it's fast and easy if you have to service the Tank
ALPHA
ALPHA
-
- Recruit
- Posts: 28
- Joined: Sun May 04, 2014 7:56 am
Re: opening heng long tiger 1
Cheers I'll have a look tonight just got my 1st tank last night just wanting to have a look inside gof metal gears on the way
Re: opening heng long tiger 1
When you get to the screws under the tracks..you have to remove the tracks... you can either pry the cap off the idler and remove that... and the tracks after or if you have the plastic track version and are lazy like I am... carefully rotate the track putting a "pulling" tension on it... and derail the track like how bicycle chains change gears
and reverse the process to put them back on.... the screws can be accessed with a medium phillips carefully inserted between the bogies
Good Luck Sean
ALPHA
and reverse the process to put them back on.... the screws can be accessed with a medium phillips carefully inserted between the bogies

Good Luck Sean

ALPHA
-
- Recruit
- Posts: 28
- Joined: Sun May 04, 2014 7:56 am
Re: opening heng long tiger 1
I'll give that a try tonight is there a lazy way to repaint the tank without having to strip the tank down ect?
-
- Warrant Officer 2nd Class
- Posts: 1144
- Joined: Tue Jan 29, 2013 1:59 pm
- Location: The bowels of Kent
Re: opening heng long tiger 1
Masking tape
Its possible to paint it with a minimum of removing the wheels/tracks and some crafty turret rotation.

-
- Recruit
- Posts: 28
- Joined: Sun May 04, 2014 7:56 am
Re: opening heng long tiger 1
That's what I was afraid of is the paint glueing the torrent
Re: opening heng long tiger 1
seanhickey2009 wrote:I'll give that a try tonight is there a lazy way to repaint the tank without having to strip the tank down ect?




I really shouldn't tell you all this...it's a bad habit to get into


ALPHA
Re: opening heng long tiger 1
Don't worry about the turret...or the wheels actually ... if the turret sticks there is enough play that you can probably just twist it to break it loose...same with the wheelsseanhickey2009 wrote:That's what I was afraid of is the paint glueing the torrent

Main thing is to have fun doing it

ALPHA
-
- Recruit
- Posts: 28
- Joined: Sun May 04, 2014 7:56 am
Re: opening heng long tiger 1
Thanks for the advice
I love the tank
