......
Forum rules
If you're planning on posting a log of your build please use the relevant build sections.
If you're planning on posting a log of your build please use the relevant build sections.
Re: hl,t34,2.4
HMMMMMMMMMMMM.. Are the photo's going to disappear .......... 
...GREAT JOB Canned... like everything you did...maybe you have to retire from Shermans and take up T34s... 
...everything is perfect... especially the welds 
Carpe Diem Sir
ALPHA
...GREAT JOB Canned... like everything you did...maybe you have to retire from Shermans and take up T34s... ...everything is perfect... especially the welds Carpe Diem Sir
ALPHA
Re: hl,t34,2.4
Very nice canned!
-
lister fiend
- Sergeant
- Posts: 565
- Joined: Mon Sep 10, 2012 3:38 pm
- Location: ashvale, hampshire
Re: hl,t34,2.4
wtf it's not a sherman 
Re: hl,t34,2.4
lister fiend wrote:wtf it's not a sherman
and... it's been weathered Excellent job of it I might add
ALPHA
-
cannedheat
Re: hl,t34,2.4
mmmmmmm... think I have done a reasonable job, to my surprise but if I try with my shermans I boo boo big time .......wot wot
Re: hl,t34,2.4
Above and beyond reasonable Sire...it's the kind of weathering that doesn't steal away from the tank...I don't know what you did to get it to where it's at... but that's how IMO it should be ...maybe you should name her Goldie locks ..like her in search of a fine bed to sleep in.. your paint job is not too hard... not too soft...but just rightcannedheat wrote:mmmmmmm... think I have done a reasonable job, to my surprise but if I try with my shermans I boo boo big time .......wot wot
Carpe Diem Sire
ALPHA
-
cannedheat
Re: hl,t34,2.4
took the t34 for a spin, first time I have driven rear wheel drive since my skoda days
all in al not bad ,cant see why there are trim slides on the tx when they are fixed, yes it is as the rx 18 tx but all the same,?
then the t34 decided to do some gardening....wot wot.....
all in al not bad ,cant see why there are trim slides on the tx when they are fixed, yes it is as the rx 18 tx but all the same,?
then the t34 decided to do some gardening....wot wot.....
Last edited by cannedheat on Thu Oct 16, 2014 10:59 am, edited 1 time in total.
-
TKcommander
- Corporal
- Posts: 293
- Joined: Wed Oct 16, 2013 6:16 pm
- Location: Temple of Doom, Somerset, UK
Re: hl,t34,2.4
Looks a lot different than the last time I saw it!!
Good job Sir!
Good job Sir!
TKcommander ~ Andy
"I'm a BAD LAD!"
"I'm a BAD LAD!"
Re: hl,t34,2.4
Hey Canned... I think Heng Long got rid of the trims on the TX because of the 2.4's sensitivity... My T-34s really don't need it...even on long straight runs... they rarely veer off ...and if they do ...just a little nudge corrects the path
Are you going to put metal tracks on this baby.... if you do... I recommend the Mato set... Dave has them I think... they have better traction than the stock Heng Long plastic or Metal tracks ..as I have both of those
I modified my suspension for the Heng Long as noted by Phil on his T34 thread (springs only..not the blocks) ...not on all the axles..just the two behind the lead bogie on each side.. so the flatter Heng Long tracks will grab better...My other T34 has the Mato tracks... the tread pattern really grabs on any surface I highly recommend those
Happy Tanking Sire
ALPHA
Are you going to put metal tracks on this baby.... if you do... I recommend the Mato set... Dave has them I think... they have better traction than the stock Heng Long plastic or Metal tracks ..as I have both of those
I modified my suspension for the Heng Long as noted by Phil on his T34 thread (springs only..not the blocks) ...not on all the axles..just the two behind the lead bogie on each side.. so the flatter Heng Long tracks will grab better...My other T34 has the Mato tracks... the tread pattern really grabs on any surface I highly recommend those
Happy Tanking Sire
ALPHA
