Need some help with recoil unit

[Applelover786]

Hey guys i need some help with a recoil i have a airsoft and i want to put the recoil unit the lights of the tank and the box all together on some 8 pin connector and a 6 board pin something i really need some help

[blimp]

Hello Applelover - good to see you - The Taigen turret is not an airsoft , it has a scale simulated gun instead , it makes a bang , a flash and the barrel recoil ( and elevation ) it does not use the 8 pin socket in the hull because it plugs straight into the RX 18 . The lights , MG and turret turn do still use the 8 pin though , the old wires that worked the airsoft /turn/elevation are not needed anymore .OK ?

[Applelover786]

But blimp there is a 8 pin socket on the rx18 which says (turn,lift,shoot,lamp) i have the connector i put the connector in the rx18 and on the other side goes in the 8 pin connector how do i connect the 8 pin connector to the recoil unit

[Applelover786]

There are 3 connectors here where do they go and what do i do with the other blackone with a heating tube aroung it im soooo confuesed right now please someone help

[Applelover786]

Here it is the 4 connectors

[Applelover786]

I have these 2 connectors aswell

[Applelover786]

Could someone please give me instructions for the taigen recoil unit

[TKcommander]

Apple you are not the first to get confused over the Taigen recoil turret, you wont be the last........

I cant help much but you might want to check out this....

viewtopic.php?f=79&t=11293

On page 2 of the excellent, detailed build thread by Tanks for the Memory you may find your answers ... Thread link below:

viewtopic.php?f=22&t=8350

[Applelover786]

Thanks tk commander