asiatam recoil blue and white wires

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
kapalek
Private
Posts: 54
Joined: Mon Sep 09, 2013 2:10 pm

asiatam recoil blue and white wires

Post by kapalek »

hello i have problem with installation of asiatam recoil
I connect all wires together (yellow red and green, red (thick)), but don't know where connect blue and white wire.
Top
scalawag

Re: asiatam recoil blue and white wires

Post by scalawag »

I think from memory the blue and white wires are the ones which go to the BB safety switch (the little one inside one of the turret hatches. You can of course bypass this switch by just joining them together (thats what I do).
Top
User avatar
MichaelC
2nd Lieutenant
Posts: 2449
Joined: Tue Oct 16, 2012 4:03 pm
Location: Toronto, Canada

Re: asiatam recoil blue and white wires

Post by MichaelC »

kapalek,

I think the blue and white is suppose to be jump together. Just pick one (blue or white it doesn't matter) and solder the one end to the other and take one of them out, or just solder them together. If you follow the wiring they should be the pos+ for the elevation and the recoil motor from the three pin board on stock HL wiring.

MichaelC
Top
Post Reply

Return to “General Questions”