Please help, problem with Heng Long M41A3 BullDog tank

[rory2202]

Hi, I just took my BullDog tank down yesterday, it was working fine when I put it away, but now it won't work.
I cleaned the battery terminals in the remote, took the top off the tank to see inside, everything looks fine. The battery is fully charged
Any suggestions?

[scalawag]

Hi
I would check that the crystals are seated properly in the tank and controller.

[jarndice]

The number of people who say they have checked the battery who have forgotten the batteries in the transmitter this is not the best place to ask this kind of question really, in future you might want to go to GENERAL QUESTIONS. shaun

[ALPHA]

How long ago did you put it away...and why did the transmitter terminals need to be cleaned..? If there was corrosion... that could be your problem right there... you might have to open the transmitter and check the board to make sure none of the acids burned any of the circuits

If that isn't the problem... try pushing side to side on the batteries... sometimes they don't contact the terminal ends.. and bind somewhere in the middle...if that doesn't work... and the light on the transmitter comes on... and the light on your tank blinks

follow Scalawag's advice and check your crystals... just for the sake of doing... just pull them out and plug them back in again...maybe even a couple of times...so the connection is cleaner

GOOD LUCK

ALPHA

[ALPHA]

The number of people who say they have checked the battery who have forgotten the batteries in the transmitter this is not the best place to ask this kind of question really, in future you might want to go to GENERAL QUESTIONS. shaun

HMMMMMMMMMMMMMMM.... Just trying to think if I ever left the batteries out.............. yup I think I did... thing was... the transmitter was a tad lighter without those eight power cells

Good point shaun... always check your batteries... and if you're going to store the tank... take them out

ALPHA

[rory2202]

I bought new Crystals for the tank and remote. Still nothing. The light on the remote comes on, but nothing seems to come on in the tank. I know there's power going to everything, but still nothing.

[dgsselkirk]

Everybody here will be asking you the same dumb questions but it never hurts to double check.
Having said that check the crystals to make sure they are the same frequency codes?

[forgebear]

hi and make sure that you have put the crystal marked as TX in the hand set and the one marked RX in the tank it has been done

[Diesel]

I have exactly the same problem as you with my HL Tiger1 took it all apart nothing was loose or broken, battery's fully charged but not starting up, ended up buying a new circuit board, now just waiting for it to turn up..
Hope you find a cure to your problem.. Cheers Diesel

[Dietrich]

Hi rory2202,
...............This is meant to be a 'funny' comment.....So please do not be offended....
.
.... ' I am looking to buy a 'Super Cheap' Bulldog to convert into a 'Sci-Fi' tank.....So how about selling it to me ? ' ....
.
BTW...I really do have an advert in the ' Wanted' section....
.
But seriously, I hope that you do manage to sort the tank out..This kind of problem can be very frustrating indeed