Using a JR 6 channel radio

Discuss the good old Heng Long electronics here, whether its mods on them or anything else, it goes here!
Post Reply
User avatar
palepainter
Sergeant
Posts: 564
Joined: Sun Nov 03, 2013 4:04 am
Location: Lafayette, CO

Using a JR 6 channel radio

Post by palepainter »

I was wondering if anyone is using a 72mhz Jr Radio with their Henglong tanks? Does anyone know the channel assignment on the henglong board by chance? Thanks in advance.
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Using a JR 6 channel radio

Post by ALPHA »

palepainter wrote:I was wondering if anyone is using a 72mhz Jr Radio with their Henglong tanks? Does anyone know the channel assignment on the henglong board by chance? Thanks in advance.
Hello Palepainter.... I've been thinking about it as I have a six channel FUTABA laying around somewhere...as far as I know ... if you want to use that 72 mhz...you will have to find a corresponding board to match it...usually a black box should have been included with the transmitter

I don't think you can merge any of the standard HENG LONG electricals with that unit you have... as usually tanks are on a totally different frequency 27 to 47 ..something like that 48 to 72 are usually for aircraft or boats

ALPHA
User avatar
palepainter
Sergeant
Posts: 564
Joined: Sun Nov 03, 2013 4:04 am
Location: Lafayette, CO

Re: Using a JR 6 channel radio

Post by palepainter »

I was able to take the freq chip out of the Henglong and put it into the JR. What you are saying is the the HL receiver will not take the signal from the JR radio. I suppose if it gets more complicated than changing the chip out in the radio, it will be best to set it ip to one of my Tactic 2.4s.
User avatar
palepainter
Sergeant
Posts: 564
Joined: Sun Nov 03, 2013 4:04 am
Location: Lafayette, CO

Re: Using a JR 6 channel radio

Post by palepainter »

I was able to take the freq chip out of the Henglong and put it into the JR. What you are saying is the the HL receiver will not take the signal from the JR radio. I suppose if it gets more complicated than changing the chip out in the radio, it will be best to set it ip to one of my Tactic 2.4s.
User avatar
Phil
Corporal
Posts: 306
Joined: Mon Apr 06, 2009 1:32 pm
Location: London, Feltham
Contact:

Re: Using a JR 6 channel radio

Post by Phil »

palepainter wrote:I was wondering if anyone is using a 72mhz Jr Radio with their Henglong tanks? Does anyone know the channel assignment on the henglong board by chance? Thanks in advance.
This para was taken from another post from Tankbear, there has been many posts on this subject.

"The Jr Radio receiver will not send the correct signals to the RX18 so it isn’t that simply. However there are some devices which sit between the Jr Radio receiver and the RX18 which translate the signal so it all works.

Options I’m aware of are
RC2HL (think this has now been superseded to RC5HL) from RC Tank Australia.
IPI4HL (Think from RC.tank.DE)
DBC2 or DBC3 (from Dan YHR)"

Try the search function :thumbup:
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Using a JR 6 channel radio

Post by ALPHA »

palepainter wrote:I was able to take the freq chip out of the Henglong and put it into the JR. What you are saying is the the HL receiver will not take the signal from the JR radio. I suppose if it gets more complicated than changing the chip out in the radio, it will be best to set it ip to one of my Tactic 2.4s.
Yeah... it's the start up board that's the problem... but I think Dr. Phil covered the details in the above post...Phil is a wizard with HENG LONGs... :thumbup:

ALPHA
User avatar
palepainter
Sergeant
Posts: 564
Joined: Sun Nov 03, 2013 4:04 am
Location: Lafayette, CO

Re: Using a JR 6 channel radio

Post by palepainter »

Thanks fellas. I used the search function with JR and nothing came up. I appreciate the help. I even tried Jr Radio and got nothing.

:( So, the first question I have asked gets the old...hey new guy try the search function. Thanks!!
User avatar
palepainter
Sergeant
Posts: 564
Joined: Sun Nov 03, 2013 4:04 am
Location: Lafayette, CO

Re: Using a JR 6 channel radio

Post by palepainter »

Im going to get the Clark system and run a 2.4 that I can assign to multiple units. Thanks.
Post Reply

Return to “Heng Long”