How to open the HL-Tiger

Fixes and mods for the HL Tiger 1

Postby birger » Thu Aug 29, 2013 10:57 am

Hi guys,

how can we open the Tiger?

Step 1: Remove the Tiger tracks
http://www.rctankwarfare.co.uk/forums/viewtopic.php?f=118&t=11460

Then lay the tank on its back. Seven screws have to be removed. Three of them are located on the bottom of the lower hull.

Image

Two are located under the track guards on the right side.

Image

Two are located under the track guards on the left side.

Image

Put the Tiger back on its wheels. Remove both tube clamps:

Image

Remove the tubes from the air intake. This can be hard. Sometimes they are fixed with glue.

Image

Now you can remove the upper hull.

Assembling works the other way round.

Greetings
Birger

For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/viewtopic.php?f=118&t=11459
User avatar
birger
Lance Corporal
 
Posts: 138
Joined: Fri Aug 16, 2013 12:08 pm

Postby jarndice » Thu Aug 29, 2013 11:41 am

If you smear vaseline on the ends of the intake pipes they come off much easier next time. shaun
User avatar
jarndice
Lieutenant-Colonel
 
Posts: 7134
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Postby AGKPeiper » Tue Sep 28, 2021 10:22 am

This is no longer valid. The screws are not there on the recent variants.

AGKPeiper
Lance Corporal
 
Posts: 126
Joined: Wed Sep 08, 2021 2:28 pm
Location: Peterborough, England


Return to HL Tiger 1

Who is online

Users browsing this forum: No registered users and 1 guest