How to open the HL-Tiger

[birger]

Hi guys,

how can we open the Tiger?

Step 1: Remove the Tiger tracks
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11460

Then lay the tank on its back. Seven screws have to be removed. Three of them are located on the bottom of the lower hull.



Two are located under the track guards on the right side.



Two are located under the track guards on the left side.



Put the Tiger back on its wheels. Remove both tube clamps:



Remove the tubes from the air intake. This can be hard. Sometimes they are fixed with glue.



Now you can remove the upper hull.

Assembling works the other way round.

Greetings
Birger

For a lot more help with your Heng Long Tiger I tank, follow the below link ...
http://www.rctankwarfare.co.uk/forums/v ... 18&t=11459

[jarndice]

If you smear vaseline on the ends of the intake pipes they come off much easier next time. shaun

[AGKPeiper]

This is no longer valid. The screws are not there on the recent variants.

[Bernie]

If anyone in the future needs to know, my 2015 model has 4 around the battery box. The secretive two are located behind the spare track mounted at the front. Track just pulls off, all screws are Phillips.