Gimble to Switch
-
- Recruit
- Posts: 47
- Joined: Thu Oct 06, 2016 9:42 am
- Location: 24360 France
Gimble to Switch
H has any body changed a gimble control to two on-off-on switch's, is this possible, I think so, But.
-
- Warrant Officer 1st Class
- Posts: 1666
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Gimble to Switch
Hello,
Type of radio,and electronic circuit board of the tank ??fonctions ??
Type of radio,and electronic circuit board of the tank ??fonctions ??
-
- Recruit
- Posts: 47
- Joined: Thu Oct 06, 2016 9:42 am
- Location: 24360 France
Re: Gimble to Switch
Hi, I do not understand fully what you are asking.As for the Radio it's an old 6ch Radiolink that I am playing around with, as for the c/board I do not think it relavent as I was thinking Servo.Jofaur86 wrote:Hello,
Type of radio,and electronic circuit board of the tank ??fonctions ??
Last edited by lady.tigger on Wed Jun 19, 2019 2:44 pm, edited 1 time in total.
-
- Warrant Officer 1st Class
- Posts: 1666
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Gimble to Switch
What i meant was what kind of radio programmable or not, and the type of electronics equiping the tank,and wath do you opérate ?
-
- Recruit
- Posts: 47
- Joined: Thu Oct 06, 2016 9:42 am
- Location: 24360 France
Re: Gimble to Switch
Let's keep it simple (because that's me) what I was thinking , say you want to operate four servo's from one gimble to operate four diffent fuctions, could i remove the gimble and replace same with two "on-off-on" moment switch's, example,, up=servo 1, down=servo 2, right=servo 3, left =servo 4, I am not a great understander of radio control as the last RC i dealt with was back in 1958 when I was 15, and am now allmost 76, so give me a break please.
Re: Gimble to Switch
Not possible.
The Gimbal consist of two channel.
1.Channel = Gimbalstick UP-Down
2.Channel = Gimbalstick Left-Right
You need one channel to drive a Servo.
With an extra electronic it is possible to switch Functions on/off by Gimbal.
There is a lot of manufactorers which offer this electronic.
The Gimbal consist of two channel.
1.Channel = Gimbalstick UP-Down
2.Channel = Gimbalstick Left-Right
You need one channel to drive a Servo.
With an extra electronic it is possible to switch Functions on/off by Gimbal.
There is a lot of manufactorers which offer this electronic.
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: Gimble to Switch
If each axis on the joystick can operate one servo, you could have each servo operating 2 push button switches onboard, they could either be push on/off or momentary.
Would that do?
I’ve seen RC truck lads use a gate on the joystick & use them this way.
Cheers
Wayne
Sent from my iPhone using Tapatalk
Would that do?
I’ve seen RC truck lads use a gate on the joystick & use them this way.
Cheers
Wayne
Sent from my iPhone using Tapatalk
-
- Recruit
- Posts: 47
- Joined: Thu Oct 06, 2016 9:42 am
- Location: 24360 France
Re: Gimble to Switch
That's what i was thinking Wayne, thank you, will start playing and will post what happens, if I still have a transmitter( exsperimental) or not.midlife306 wrote:If each axis on the joystick can operate one servo, you could have each servo operating 2 push button switches onboard, they could either be push on/off or momentary.
Would that do?
I’ve seen RC truck lads use a gate on the joystick & use them this way.
Cheers
Wayne
Sent from my iPhone using Tapatalk
-
- Recruit
- Posts: 47
- Joined: Thu Oct 06, 2016 9:42 am
- Location: 24360 France
Re: Gimble to Switch
by the way are you still following my 8X8 build.lady.tigger wrote:That's what i was thinking Wayne, thank you, will start playing and will post what happens, if I still have a transmitter( exsperimental) or not.midlife306 wrote:If each axis on the joystick can operate one servo, you could have each servo operating 2 push button switches onboard, they could either be push on/off or momentary.
Would that do?
I’ve seen RC truck lads use a gate on the joystick & use them this way.
Cheers
Wayne
Sent from my iPhone using Tapatalk
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: Gimble to Switch
Yep, I’m like a tramp on chips
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk