RC Tank Warfare community hobby forum

Can anyone tell me if it is possible to do away with the elevation drive and replace it with another turret motor so you get two left and right drives running of the one board ?

Can't see why not they are both just motors, the only thing is if you hook a turret rotation motor uo too the elevation wiring it will only turn one way...........

Thats my thinking ,any thoughts on how it could be done,maybe use a motor socket they go back and forward.

I had considered swopping the simple gun/elevation switch in the Tx for a turret one ( or even for a proportional motor switch ) - but have no idea if the Tx /Rx boards will support it , plus the gun firing signal would need sorting too - too complicated for my little brain , one of the aftermarket boards is a much easier alternative