Page 1 of 1

HL Pershing, Gearbox Upgrades?

Posted: Sun Jun 17, 2012 2:02 pm
by Glen B
Does anyone have a favourite product in this category?


The only item I have found so far is this from RCTankWars;

Bulldog / M-26 / KV- 1 Steel Gearbox & 480 Motors

HL Steel Gearboxs with the 480 motors, that drops right into our Bulldog, Pershing or KV-1. This setup is the standard gearing combine this with the smooth strong steel gears and 480 motors should make for excellent speed, power & torque. You will increase your top end speed and add the torque with the Promax 480s without the need for gearing down.


http://rctankwars.com/Products.asp

Re: HL Pershing, Gearbox Upgrades?

Posted: Sun Jun 17, 2012 2:57 pm
by FreakyDude
with 480's you will need to add some cooling to the RX18, personally I use 400's with a steel gear and have no issues.
my panther uses the brass 3 to 1 with standard motors but i am waiting for the splines to bend lol.

Asiatam has a set of 3 to 1 gears that are steel, if that is what RCtankwars sells then they should be good for a try.

Re: HL Pershing, Gearbox Upgrades?

Posted: Sun Jun 17, 2012 3:53 pm
by Glen B
FreakyDude wrote:with 480's you will need to add some cooling to the RX18
If I make up a Pershing, the RX-18 will be long gone, replaced with an SLU.

My "cats" have Mato 3:1's with SLU's and I find them to be a good combination.

Re: HL Pershing, Gearbox Upgrades?

Posted: Sun Nov 11, 2012 7:31 pm
by greengiant
This may not have any bearing on what you need, But it appears that rctankwars.com is no longer an operational web site. last spring I recieved replies when I tried to place orders but I tried to purchace some items last month and got no replies to multiple emails to the site

Re: HL Pershing, Gearbox Upgrades?

Posted: Sun Nov 11, 2012 7:53 pm
by B.A.D.A.S.S.Force
greengiant wrote:This may not have any bearing on what you need, But it appears that rctankwars.com is no longer an operational web site. last spring I recieved replies when I tried to place orders but I tried to purchace some items last month and got no replies to multiple emails to the site
You're bringing up old threads mentioning RCTankWars, but news has been out for a while now ... sadly, the owner Phil has passed away almost a couple months ago, read this post => RC Tank Wars Owner Phil Pflueger has died

~ Craig ~

Re: HL Pershing, Gearbox Upgrades?

Posted: Sun Dec 02, 2012 6:22 pm
by greengiant
tank zone uk has a nice all metal gear reduction unit that I just installed in one of my Pershings at a very nice price and shipping within the uk is free