Page 3 of 3
Re: RX-18 Cooling Fan
Posted: Thu Jan 08, 2009 1:55 am
by philipat
Good point...hadn't considered that. Does the cover come off if someone wanted to go down that road?
Re: RX-18 Cooling Fan
Posted: Thu Jan 08, 2009 12:11 pm
by tankman
Hi Philipat the cover can be fully removed if you want to do it that way. The board just sits inside. All the best for now
Alan
Re: RX-18 Cooling Fan
Posted: Thu Jan 08, 2009 5:28 pm
by Dmon1996
I have had good luck with getting laptop fans off eBay for a Dell 4150. I've gotten thenm for about $5.00 each with the shipping when buying three. They are about 25mm, and are 5 Volts.
Re: RX-18 Cooling Fan
Posted: Thu Jan 08, 2009 6:48 pm
by tankman
Good buy those Dmon 1996. I went down to Cardiff today and picked up the 17 x 17mm 5v fans for £4.99 each. Quick test shows they will run fine on 7.2v but I may go and get a resistor to keep the voltage down to the recomended 5v. These little fans give a nice flow of air into the RX 18 enclosure. I hope that it will keep the fet's nice and cool even under load. All the best for now
Alan
PS also picked up a digital vernier calliper for £9.99 in the sale
